Product Card
Table Of Contents
- Contents
- Tables
- Figures
- 0 Document History
- 1 Introduction
- 2 Product Concept
- 3 Application Connector Interface
- 3.1 Pin Assignments and Electrical Description
- 3.2 Characteristics
- 3.2.1 Power Supply and Ground
- 3.2.2 Control Signals
- 3.2.3 Tunable Antenna Interface
- 3.2.4 WWAN/WiFi Coexistence Control
- 3.2.5 Dynamic Power Reduction
- 3.2.6 USB Interface
- 3.2.7 PCI Express® Interface
- 3.2.8 SIM/UICC Interface
- 3.2.9 eUICC Interface
- 3.2.10 GPIO Interface
- 3.2.11 Status
- 3.2.12 Add-in Card Configuration Pins
- 4 Antenna Interface
- 5 Operation
- 6 Appendix
Cinterion
®
MV31-W Hardware Interface Description
4.1 Antenna Interface Specification
75
t MV31-W_HID_v01.009a 2022-04-27
Public / Preliminary
Page 38 of 76
4.1 Antenna Interface Specification
The below Table 13 and Table 14 list RF minimum Rx sensitivity specifications.
Measurement conditions: T
amb
= 25°C, V
3V3
= 3.3V.
Table 13: RF antenna interface LTE: Conductive minimum receiver input sensitivity (dBm)
LTE band
(BW: 10MHz
ANT0 ANT1 ANT2 ANT3 MIMO
Combined
1 -96 -97 -96 -96 -102.5
2 -96 -97 -95.5 -96 -102
3 -96 -96 -95.5 -96 -102.5
4 -96 -97 -96 -96 -103
5 -99 NA NA -99 -102
7 -96 -96 -95.5 -96 -102.5
8 -99 NA NA -99 -102
12 -98.5 NA NA -99 -101.5
13 -98.5 NA NA -99 -101.5
14 -98 NA NA -99 -101
17 -98.5 NA NA -99 -101.5
18 -98.5 NA NA -99 -101.5
19 -98.5 NA NA -99 -101.5
20 -99 NA NA -99 -102
25 -96 -96 -95.5 -96 -102
26 -98.5 NA NA -99 -101.5
28 -98.5 NA NA -99 -101.5
29 -98.5 NA NA -99 -101.5
30 -95.5 -96 -96 -96 -101
32 -96 NA NA -96.5 -99
34 -97 NA NA -97 -100
38 -96.5 -96.5 -96 -96.5 -102.5
39 -97 NA NA -97 -100
40 -96 -97 -96 -96.5 -103
41 -96 -96 -95.5 -96 -102
42 -96.5 -97 -97 -96.5 -103
46 -96 NA NA -95 -98
48 -96.5 -97 -97 -96.5 -103
66 -96 -97 -97 -97 -103
71 -99 NA NA -99 -102