GPS Receiver User Guide

Screen Descriptions 123
Screen Descriptions
File Manager Screen
The File Manager screen, Figure 4.16, lets you examine details of each data file stored in the
receiver and delete data files that are no longer needed. Each data file is tagged with an
identifier indicating if the file has been downloaded; this is very useful when deciding which
files to delete when additional memory is required. The
File Manager screen is accessed by
selecting
File Manager in the Survey Menu. Table 4.13 describes the screen parameters.
The file naming convention for survey data files is shown in Figure 4.17.
Figure 4.16 File Manager Screen
Table 4.13 File Manager Screen Parameters
Parameter Description
R1234...... etc. A list of the raw data files stored in the ProMark2 GPS receiver. Up to 100 files can be
stored in the receiver at one time. Files are automatically closed when the receiver is
turned off. Each file has a symbol associated with it with the following meanings:
> Indicates that this file is the current file into which data is being recorded
+ Indicates that the file has not yet been downloaded from the receiver
- Indicates that the file has been downloaded from the receiver.
Detail Map A detailed map uploaded into the receiver’s memory. If more than one map is uploaded,
the Detail Map parameter will include information of all maps uploaded. Detail maps
are provided on the MapSend Streets CD.
Delete Deletes the highlighted file.
Del All Deletes all files, except any uploaded map.
Arrow button To delete a particular file, use the up/down arrows on the arrow button to highlight the
file. The selected file appears in the lower pane of the display. Now, if necessary, use the
left/right arrows on the arrow button to highlight Delete. Press ENTER to delete the file.
Upper pane
Lower pane