GPS Receiver User Guide

Surveying with ProMark2 67
Surveying with ProMark2
Steps 3-9 below cover receiver and survey setup functions prior to the start of actual data
storage. You will not need to access all of these functions each time you perform a survey,
since some items, such as selection of units and receiver ID will remain the same for most
surveys.
3. Select
Setup from the Survey screen.
With Setup highlighted, press ENTER to bring up the Survey Menu , Figure 3.31.
The Survey Menu provides you access to receiver and survey setup functions. You may wish
to exercise some of these functions prior to beginning data collection.
4. From the
Survey Menu, select Survey Mode. Set the mode to Static.
5. From the
Survey Menu, select Point Attribute. Enter attribute information for the
point you are about to survey.
With
Point Attribute highlighted, press Enter to bring up the Point Attribute
screen, Figure 3.32.
Figure 3.31 Survey Menu