User Manual Part 1

IS-900 User Guide Page 28 of 159

1.8.2. Wireless System

Figure 13 illustrates how the cables, connectors and adaptors are set-up for the wireless version

of the IS-900 System and MicroTrax devices.

Figure 13 - Wireless IS-900 and MicroTrax Cables, Connectors and Adapters

1. Cable: Processor to SoniStrip

• Part no. 078-00088-0030

• 30 feet long

• RS422 communication

• 10-pin RJ-48 cable connector

This 30 foot cable provides basic +12 VDC power and transmits the SoniDisc trigger signals to

the SoniStrip Constellation array. It connects from the back of the IS-900 Processor (any PORT

#) to the SoniStrips and can run a maximum length of 15 meters (50 ft.)*.

*NOTE: Maximum length of the total SoniStrip daisy chain measured from the IS-900 Processor

to the end of the SoniStrip chain is 24 meters (80 ft.) without external power boosters.

SoniStrip

Processor

Head Tracker

Not – to - Scale

RJ48

RJ12

Hirose

Connector Symbols

Wand

* Configuration

depends on your

constellation

ATA