User Manual Part 1

IS-900 User Guide Page 57 of 159
Figure 30 - ISDEMO Constellation Tool Screen with Tracking Device
Also check the LCD panel of the IS-900 Processor. For each connected tracking station, “T”
should appear on the IS-900 Processor’s front LCD panel to indicate proper tracking (Figure 31).
If an “X”, appears you may not have properly saved or loaded in the SoniStrip Constellation
Array. The “X” could also indicate hardware, cabling or wireless link issues. Go back to Steps 5
& 6 to reload the proper configuration script containing the correct Constellation Configuration
Array. Refer to Section 11 for troubleshooting hardware, cabling and wireless connectivity
issues.
Figure 31 - Tracking Status Display on IS-900 LCD Panel
5. Saving the Configuration
Save the current settings into firmware of the IS-900 Processor by selecting the menu item File?
Save Current Settings from the main ISDEMO (Figure 32). A window will come up asking to
save into permanent memory. Select YES to save into permanent memory.