User Manual Part 1

IS-900 User Guide Page 76 of 159
Apply New Configuration MCe<>
This command reconfigures the system with the new
MicroTrax station and SoniDisc information. A
Configuration Session is the period during which the
station and constellation configuration commands are
received and accepted. The configuration session starts
when the first MC command arrives. MC commands are
saved but not applied to the system configuration until the
MCe<> command is received. This command executes all
MC commands received since the start of the
Configuration Session and computes the new system
state.
Cancel Configuration Session
MCx<>
Cancel the configuration session command. All MC
commands received during the session are discarded.