User Manual Part 2

IS-900 User Guide Page 101 of 159
14. Appendix E – ISDEMO Reference
For ISDEMO Versions 4.1710 and above.
ISDEMO is a tool to help you test, diagnose and configure your system. With ISDEMO, it is
possible to test all the features of the tracker. Use it also to set and save tracker configurations.
Software included with your tracking device consists of the following:
ISDEMO32.EXE Win32 version for use with Windows2000/NT/XP or VISTA.
ISDEMO provides a convenient graphical interface that can configure most of the tracker
parameters. It does not directly support some features. Sending single line commands through
the serial port or via the ISDEMO Command prompt can configure these features. See the
section titled “Interface Communication Protocol” for descriptions of all the available commands.
14.1. Getting Started
Install the InterSense product CD on your machine. It will automatically create a directory in y our
hard drive called “InterSense.”
Using ISDEMO
The first screen you will see is the hardware selection window. This program creates a different
interface depending on the tracker model selected.
Select IS-900 Series interface and click Accept to begin. Use the Detect option from this
first screen to detect serial communication port and baud rate parameters only if you
have trouble setting them manually.