User Manual Part 2

IS-900 User Guide Page 102 of 159
The DLL Compatible interface can be used for all InterSense trackers when isense.dll is
installed in the \WINDOWS\SYSTEM32 directory of a Windows PC. For set-up and
configuration of the IS-900, it is recommended to use the IS-900 Series interface, as
some of the interactive controls through the isense.dll interface are inactive in ISDEMO.
However, the DLL Compatible option can be useful to test that the IS-900 system is
properly interfacing to the isense.dll for verification of an end-user application.
Note: You must select either IS-900 or DLL Compatible (if the isense.dll is installed), or
ISDEMO will not be able to correctly configure your tracker.
If you have an InterSense RF analyzer accessory, you can launch the user interface
from this first screen by selecting Wireless? RF Scope on the menu bar. See section
14.8 for details.
ISDEMO: Main window
ISDEMO has six primary menus in its main window:
• File
• Communications
• Parameters
• Display
• Tools
• Help
The following sections will walk you through all the menu options.