User Manual Part 2

IS-900 User Guide Page 104 of 159
14.3. Communications Options
This menu allows the communications port and the baud rate of the computer ISDEMO
is running on to be set to match the settings of the tracker. The default settings are
COM port 1, with a rate of 115,200 baud.
Communications Setup The IS-900 allows both Serial communications as well as
Ethernet communications. The Ethernet interface is used as a
command interface with exactly the same InterSense
command protocol used for the serial port. Either
communications interface is available as a view port while the
host application is communicating through the other interface.
Using ISDEMO on one port while communicating tracking data
through the second allows performance of basic diagnostics or
system configuration while the host application is live.
Selecting the Communication Setup menu option brings up of
the following configuration window.