User Manual Part 2

IS-900 User Guide Page 107 of 159
Tracker System Parameters
Output Mode Polled or Continuous. In Polled mode, data records are sent
out only in response to a P command.
Measurement (output record)
Inches
Centimeters
Data Format ASCII
(F command) Numbers are returned in ASCII format. Each
number has 7 ASCII characters: a sign, 3 digits, a decimal
point, and 2 more digits.
Binary
(f command) Floats are sent as 4 bytes of IEEE 32-bit floats.
This can increase the data throughput by minimizing the size
of the record.
Genlock State
(MG command) Off, Automatic (not supported), External
(manual, supply strobe rate), Internal (supply output record
rate).