User Manual Part 2

IS-900 User Guide Page 128 of 159
Define Coordinate System
Used to specify the exact location of your origin when using a
total station to measure the exact XYZ locations of your
SoniDiscs.
Move Coordinate System
Used to move the origin of the coordinate system to a new
location. After this menu item is selected, left-click in the
display area and while holding the button down, move the
mouse. The coordinate system will then move with the
mouse. Release the mouse button when satisfied with the
location. Positions of the SoniStrips are recalculated for the
new coordinate system and redrawn. This command has the
same effect as selecting all SoniStrips and moving them to a
new location relative to the origin. To apply the changes use
Send To Tracker item in the Constellation menu.
Rotate Coordinate System
Used to rotate the coordinate system. After this menu item is
selected, left-click in the display area and while holding the
button down, move the mouse up or down. The coordinate
system will rotate in the clock-wise or counter clock-wise
direction. Release the mouse button when satisfied with the
new orientation. Positions of the SoniStrips are recalculated
for the new coordinate system. To apply the changes use
Send To Tracker item in the Constellation menu.