User Manual Part 2

IS-900 User Guide Page 130 of 159
Using the Constellation Graphical Interface to manually configure a Constellation
By “right-clicking” your mouse in the constellation window, a list of options to manually
configure your constellation appears. Use your mouse to select which
SoniStrip/SoniDiscs you would like to manipulate.
Remove Removes selected (highlighted in yellow) SoniStrips or
SoniDiscs from the Constellation.
Inserting SoniStrips
1. Right-click in the Constellation Tool window at the position
where the new SoniStrip is to be placed.
2. Select Insert Rev3 SoniStrip item. Rev1 and Rev2 SoniStrips
are not used with IS-900 SimTracker or VETracker processor
configurations. A window listing available SoniStrip options is
displayed. Select one and click OK. The new SoniStrip will
appear in the display area. It is also removed from the list of
available SoniStrip options.