User's Manual
Table Of Contents
- Table of Contents
- Table of Figures
- 1. System Description
- 1.1. IS-900 Configuration
- 1.2. IS-900 SimTracker & VETracker Processor
- 1.3. SoniStrips, SoniFrame, SoniWing & SoniPod acoustic pulse transmitters
- 1.4. Acoustic Constellation Mounting Considerations
- 1.5. Tracking Station Description
- 1.6. IS-900 Cables, Connectors, Adaptors, Power Boosters and Wireless Radios
- 1.7. IS-900 Support CD
- 2. Specifications
- 3. Installation and Set-up
- 4. Interface Communication Protocol
- 5. LCD Status & Settings Screen
- 6. Appendix A – Frequently Asked Questions
- 7. Appendix B – Troubleshooting & Tips
- 8. Appendix C – Health & Safety Warnings with Tracker Use Guidelines
- 9. Appendix D – Care & Maintenance
- 10. Appendix E – ISDEMO Reference
- 11. Appendix F – GENLOCK Synchronization
- 12. Appendix G – Developers Instructions
- 13. Appendix H – Interface Protocol Commands – Quick Reference
InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 104 of 177
10. Appendix E – ISDEMO Reference
For ISDEMO Versions 4.2703 and above.
ISDEMO is a tool to help you test, diagnose and configure your system. With ISDEMO, it is
possible to test all the features of the tracker. Use it also to set and save tracker configurations.
Software included with your tracking device consists of the following:
ISDEMO32.EXE Win32 version for use with Windows XP/Vista/7.
ISDEMO provides a convenient graphical interface that can configure most of the tracker
parameters. It does not directly support some features. Sending single line commands through
the serial port or via the ISDEMO Command prompt can configure these features. See the
section titled “Interface Communication Protocol” for descriptions of all the available commands.
10.1. Getting Started
Install the InterSense product CD on your machine. It will automatically create a directory in your
hard drive called “IS-900 Software” (by default, the directory will be C:\InterSense\IS-900
Software).
Using ISDEMO
The first screen you will see is the hardware selection window. This program creates a different
interface depending on the tracker model selected.