User's Manual

InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 176 of 177
Output record list settings O{stationNum},[p1],[p2],[p3],.....,[pn]<>
Define Tip Offsets N{stationNum},[Ox, Oy, Oz]<>
Position Operational Envelope V{stationNum},[Xmax,Ymax,Zmax,Xmin,Ymin,Zmin]<>
Hemisphere H{stationNum},[p1,p2,p3]<>
Time Units MT<> Sets to milliseconds.
Mt<> Sets to microseconds.
Set Current Time to Zero MZ<>
Ethernet Communication Parameters MEthIp{address}<> Set IP address
MEthTcpPort{port}<> Set TCP port
MEthUdp{state}<> Set UDP state
MEthUdpPort{port}<> Set UDP port
MEthSubnet{subnet}<> Set subnet
MEthMode{mode}<> Set manual or DHCP mode
MEthApply<> Apply Ethernet settings
InterSense System Status Record Request MS<>
Tracking Status Record Request MP<>
Genlock Synchronization MG[State, Rate]<>
Genlock Phase MGP[Param]<>
Configuration Lock MConfigLockMode{Mode}<>
SoniStrip LED Control ML[state]
Error reporting ME<>
MEC<>
ME1<>
ME0<>
Command Logging MLogOpen<>
MLogClose<>
MLogClear<>
MLogState<>
MLogSend<>
InterSense Station Status Record Request Ms{stationNum}<>
Prediction Interval Mp{stationNum},[Interval]<>
Perceptual Enhancement Level MF{stationNum},{Mode}<>
Compass Heading Correction MH{stationNum},{state}<>
Rotational Sensitivity Level MQ{stationNum},[Sensitivity Level]<>
Associate Fixed PSE with a Constellation MCF{FPSE number}, {xp, yp, zp, xn, yn, zn, IDcode}<>
Disassociate Fixed PSE from Constellation MCf[Fixed PSE number, IDcode]<>
Clear All Fixed PSEs (Constellation) MCC<>
Apply New Configuration MCe<>
Cancel Configuration Session MCx<>