User's Manual
Table Of Contents
- Table of Contents
- Table of Figures
- 1. System Description
- 1.1. IS-900 Configuration
- 1.2. IS-900 SimTracker & VETracker Processor
- 1.3. SoniStrips, SoniFrame, SoniWing & SoniPod acoustic pulse transmitters
- 1.4. Acoustic Constellation Mounting Considerations
- 1.5. Tracking Station Description
- 1.6. IS-900 Cables, Connectors, Adaptors, Power Boosters and Wireless Radios
- 1.7. IS-900 Support CD
- 2. Specifications
- 3. Installation and Set-up
- 4. Interface Communication Protocol
- 5. LCD Status & Settings Screen
- 6. Appendix A – Frequently Asked Questions
- 7. Appendix B – Troubleshooting & Tips
- 8. Appendix C – Health & Safety Warnings with Tracker Use Guidelines
- 9. Appendix D – Care & Maintenance
- 10. Appendix E – ISDEMO Reference
- 11. Appendix F – GENLOCK Synchronization
- 12. Appendix G – Developers Instructions
- 13. Appendix H – Interface Protocol Commands – Quick Reference
InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 25 of 177
1.6. IS-900 Cables, Connectors, Adaptors, Power
Boosters and Wireless Radios
Due to the flexible design of the IS-900 system, many systems are custom configured and
installed by trained service representatives and may come with varying cabling and interconnect
items.The items and their descriptions in this section cover all standard and optional interconnect
components available for the IS-900.
Contact InterSense for detailed cable, adapter, or power booster specifications/questions.
1.6.1. Wired System
Figure 13 illustrates how the cables, connectors and adaptors are set-up for the wired version of
the IS-900 System and MicroTrax devices.
Figure 13 - Wired IS-900 and MicroTrax Cables, Connectors and Adapters
SoniStrip*
SoniStrip*
1
2
IS-900 Processor
Head Tracker
Not – to - Scale
Adapter
RJ48
RJ12
Hirose
Connector Symbols
Wand
Adapter
3
4
5
6
1
1
*Configuration
depends on your
constellation