User's Manual
Table Of Contents
- Table of Contents
- Table of Figures
- 1. System Description
- 1.1. IS-900 Configuration
- 1.2. IS-900 SimTracker & VETracker Processor
- 1.3. SoniStrips, SoniFrame, SoniWing & SoniPod acoustic pulse transmitters
- 1.4. Acoustic Constellation Mounting Considerations
- 1.5. Tracking Station Description
- 1.6. IS-900 Cables, Connectors, Adaptors, Power Boosters and Wireless Radios
- 1.7. IS-900 Support CD
- 2. Specifications
- 3. Installation and Set-up
- 4. Interface Communication Protocol
- 5. LCD Status & Settings Screen
- 6. Appendix A – Frequently Asked Questions
- 7. Appendix B – Troubleshooting & Tips
- 8. Appendix C – Health & Safety Warnings with Tracker Use Guidelines
- 9. Appendix D – Care & Maintenance
- 10. Appendix E – ISDEMO Reference
- 11. Appendix F – GENLOCK Synchronization
- 12. Appendix G – Developers Instructions
- 13. Appendix H – Interface Protocol Commands – Quick Reference
InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 57 of 177
Figure 26 - Constellation Tool Selection
From the Constellation Configuration Tool window, select Retrieve from Tracker from the
menu item Constellation (Figure 27).
Figure 27 - Checking installed SoniStrip Constellation Array
This will upload the grid into the Constellation Configuration Tool window from the IS-900
Processor. At this point, you should see SoniStrip Constellation Arrays similar to examples
covered in Section 3.3 for typical configurations (Figure 28, Figure 29 - ISDEMO Constellation
Tool Screen for Wall Mount Power Wall Applications and Figure 30).