User's Manual

Wireless InertiaCube3 Supplemental Manual 16
Doc. No. 072-00096-0E05
Note: The COM port reported by deviceTool can either be a physical or virtual COM port
depending on your Wireless InertiaCube3 Receiver configuration. For USB InertiaCube3
Receivers, the USB driver software assigns a virtual COM port to Windows OS for
communications. For RS-232 Serial receivers, the physical COM port is used & reported by
deviceTool.
3.2 Changing Receiver Channels
To change the channel used by a receiver InertiaCube3 pair, select the receiver with the mouse
and then under the Wireless menu select “Change Port Channel”. In the dialog box select the
new channel, (Make sure it is not already used by another attached receiver). Valid channels are
0-15. deviceTool will change the receiver and associated InertiaCube3 to the new channel. The
new settings will automatically be stored in non-volatile memory. See deviceTool windows
below.
Changing Receiver Port Number