User's Manual

Wireless InertiaCube3 Supplemental Manual 20
Doc. No. 072-00096-0E05
3.4 Testing the Wireless Link of InertiaCube3 Devices
deviceTool is also used to test and verify the wireless communication channels used with the
InertiaCube3. To verify which physical InertiaCube3 corresponds to each box in the window,
select a Wireless InertiaCube3 box and choose Test Linkfrom the Wireless menu or press the
space bar. The yellow LED for the InertiaCube3 will light up. Again, if possible, it is best to do
this with just the receivers and InertiaCube3 that you want to associate powered-on (with all
others already configured powered-off) so you dont accidentally pair the wrong devices.