User Manual Part 2

IS-900 User Guide Page 108 of 159
Sync Rate
Value in Hertz used with Genlock enabled.
Sync Phase
0-100%.
Please see section 15 for complete details.
SoniDisc LEDs (ML command) Enable and disable the SoniStrip LEDs.
Ultrasonic Volume Sets the volume of the SoniDiscs (ultrasonic emitters).
Ranges between 0 (off) and 3 (maximum volume).
Station and Sensor Parameters
The window shown below lists each station to be configured. A “Station” is a position
and/or orientation-sensing unit. IS-900 Series trackers can support up to 7 stations (the
8th port being reserved for SoniStrips).
Before data is displayed in this list, ISDEMO attempts to receive the configuration data
from the tracker. If this fails for any reason, an error message is displayed and data in
the list may not be reliable.
Double clicking on the Station line or selecting the Change button will bring up the
Station Configuration window where changes can be made.