KB-6622V IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING STEAM CLEANER. USE ONLY AS DIRECTED.
USER’S GUIDE THANK YOU Congratulations on your choice of the H2O MOP X5™, a new more compact and lighter steam cleaner with a detachable hand-held steamer. The H2O MOP X5™ is a new way of cleaning that is effective and far more hygienic than conventional methods. The H2O MOP X5™ achieves a high degree of hygiene and increases cleansing power by converting water to steam using a microfiber floor cloth to enhance absorbency.
USER’S GUIDE ONE YEAR LIMITED WARRANTY Thank you for your purchase of the amazing H20 Mop X5™. With this warranty, the H20 Mop X5™ is warranted, to the original owner, for one (1) year from the date of purchase against defects in material and workmanship under normal use and service. Should your H20 Mop X5™ prove defective within one (1) year from date of purchase, do not return your unit to the point of purchase. Please call Thane Direct’s Customer Care Team at 1-877-771-7017.
USER’S GUIDE IMPORTANT SAFEGUARDS PLEASE READ CAREFULLY. FAILURE TO FOLLOW THE PRODUCT INSTRUCTIONS WILL VOID YOUR WARRANTY. READ ALL INSTRUCTIONS BEFORE USING THIS STEAM CLEANER. As with any electric appliance, basic precautions should always be observed when using this product, including the following: ! WARNING 1. Verify that the main voltage indicated on the product corresponds with the voltage of your electrical outlet. Rated voltage: 110~120V, 60HZ, 1300W or 220~240V, 50/60HZ, 1300W 2.
USER’S GUIDE • Cleaning blocked steamer accessories. Due to the high mineral content of water in some areas, you may notice that less steam comes out from the Hand-Held Steamer accessories. This may be caused by calcium buildup inside the tip of the nozzle. How to clean calcium buildup: We recommend using a spray lubricant. Spray a small burst or two of the lubricant inside the tip of the Jet Nozzle.
USER’S GUIDE 24. Use only as directed in this manual. Use only manufacturer’s recommended accessories. 25. Use of attachments not provided or sold by the manufacturer or authorized resellers may cause fire, electric shock or injury. 26. The liquid or steam should not be directed towards equipment containing electrical components, such as the interior of ovens. 27. Do not expose to rain. 28. Stop using the H2O MOP X5™ if you observe water leakage, and contact a qualified technician. 29.
USER’S GUIDE CLEANING AND MAINTENANCE USER’S GUIDE KEY FEATURES ! WARNING Curved Handle BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET WHEN PERFORMING CLEANING. Drain the remaining water in the tank and clean the tank after every use. Please use detergent to clean the accessories (Jet Nozzle and Round Brush) when they are dirty, then wash with clean water and air dry.
USER’S GUIDE OPTIONAL ACCESSORIES USER’S GUIDE AFTER USE 1) Unplug Power Cord from outlet. 2) Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from Mop Head, as cleaning cloth could still be hot. Window Cleaning Cloth Garment steaming Cloth Lint Cloth 3) Any water remaining in the Water Tank should be emptied prior to appliance storage. Always empty the Water Tank at the end of each use.
USER’S GUIDE USER’S GUIDE HOW TO ASSEMBLE THE H2O MOP X5™ ! WARNING DANGER OF SCALDING Do not touch the Window Cleaning/Garment Steamer Tool or the Lint Cloth during usage, as these components can get extremely hot. Keep the Extension Hose away from your body and avoid touching the hose, as it can get hot. 7) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit, refill the Water Tank and continue cleaning.
USER’S GUIDE 3) Insert the Curved Handle into the designated opening of the Extension Handle until it gets locked in place with the Curved Handle Lock Button. 3a 3b USER’S GUIDE 8) Once you finish cleaning allow the Duster Coral Cloth to cool down and carefully remove it from the Duster frame, as the Coral Cloth could still be hot. LINT CLOTH Make sure that the H2O MOP X5™ is unplugged. Make sure both parts, the Extension Handle and the Curved Handle, are secured in place before usage.
USER’S GUIDE DUSTER Make sure that the H2O MOP X5™ is unplugged. 1) Fill the Water Tank with water. Please refer to the “HOW TO USE THE H2O MOP X5™” section in this manual. USER’S GUIDE Insert the Power Supply Cord into the Cord Holder located at the top of the Extension Handle as illustrated in Fig. 4c and then insert Power Supply Cord into the Upper Cord Wrap as illustrated in Fig. 4d.
USER’S GUIDE USER’S GUIDE HOW TO USE THE H2O MOP X5™ PLEASE READ BEFORE USE The H2O MOP X5™ is designed to thoroughly clean floor surfaces, such as marble, ceramic, carpet, stone, linoleum, and sealed hardwood floors and parquet. Not all floor types are suitable for steam cleaning. The heat and steam action my remove the wax on surfaces treated with wax. Do not use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an extended period of time.
USER’S GUIDE USER’S GUIDE 6) When the Hand-Held Steamer stops emitting steam, simply turn off and unplug the unit, refill the Water Tank and continue cleaning. 1) Fill the Water Tank with water: 7) Once you finish cleaning, allow the Coral Cloth to cool down and carefully remove it from the Window Cleaning Tool, as cleaning cloth could still be hot. Make sure that the H2O MOP X5™ is unplugged.
USER’S GUIDE USER’S GUIDE How to use Optional Accessories Replace the Water Tank cap and 1g 1h turn clockwise approximately 90° to the “CLOSE” position until the cap is tightened securely. The H2O MOP X5™ uses tap water. However, in areas with hard water, distilled water should be used for better performance. Make sure the Copper Cone inside the Water Tank is always submerged in water (As illustrated in Fig. 1i) while operating the H2O MOP X5™. Window Cleaning Tool Make sure the H2O MOP X5™ is unplugged.
USER’S GUIDE This may also happen if the Power Switch ( O / I ) was left in the ON ( I ) position (lower position) after previous use and the unit was disconnected by unplugging only. Make sure to turn the unit off after each use and then disconnect from the electrical outlet so the unit is in the OFF ( O ) position when used next time. 4) Slowly pass over surfaces to be cleaned. Apply steam liberally. Keep a towel handy and wipe away any excess water that may accumulate.
USER’S GUIDE HOW TO USE HAND-HELD STEAMER ! WARNING Never leave the H2O MOP X5™ unattended while plugged in. For Best Results: 1) Sweep or vacuum floor prior to using the H2O MOP X5™. 2) To avoid puddling of water, the Microfiber Cloth must be clean and dry for use. To replace the cleaning cloth, proceed as follows: Let the cleaning cloth cool down, remove cloth from unit, replace with a new Microfiber Cloth (Optional Item) and continue use. Select low steam regulator position.
USER’S GUIDE USER’S GUIDE HAND-HELD STEAMER Garment Steaming Tool 4. To use the Window Cleaning tool as a Garment Steamer, install the Microfiber Cloth or the Lint Cloth over the Window Cleaning/Garment Steamer Tool (as illustrated in Fig. 4a, 4b & 4c). 4a 4b Black Tag The Hand-Held Steamer is an ideal portable cleaner for use on work surfaces, countertops, sinks, windows, mirrors, tiles and spot cleaning on floors, carpets and rugs.
USER’S GUIDE USER’S GUIDE How to assemble the Optional accessories 4) To attach the Jet Nozzle: Insert the Jet Nozzle into the designated hole in the Main Body until it locks in place with the Lock Button on the Main Body (you will hear a clicking sound), as illustrated in Fig. 4a. Remove the Mop Head by pressing the Lock Button on the Main Body or remove the Jet Nozzle following the same procedure. 4a 1.
Distributed by: Thane International, Inc., La Quinta, CA 92253 www.thane.com Thane Direct Canada, Inc., Mississauga, Canada www.thane.ca Thane Direct UK, Ltd., Admail ADM3996, London, W1T 1ZU www.thanedirect.co.uk H2O MOP X5™-Eng.CAN. Copyright © 2010 Thane International, Inc. MADE IN CHINA (Dec.