Operation Manual

USER’S GUIDE

3) Insert the Curved Handle into the

designated opening of the Extension

Handle until it gets locked in place

with the Curved Handle Lock Button.

Make sure both parts, the

Extension Handle and the Curved

Handle, are secured in place before

usage.

4) Turn the Lower Cord Wrap to align the

cord channel opening with the cord

channel in the Extension Handle as

illustrated in Fig. 4a.

Insert the Power Supply Cord all the way

in its channel and turn the Lower Cord

Wrap to lock the Power Supply Cord

as illustrated in Fig. 4b.

4b4a

8) Once you finish cleaning allow the Duster Coral Cloth to cool down and

carefully remove it from the Duster frame, as the Coral Cloth could still be hot.

LINT CLOTH

Make sure that the H2O MOP X5™ is unplugged.

1) Fill the Water Tank with water. Please refer to

the “HOW TO USE THE H2O Mop X5™” section

in this manual.

2) Install the Lint Cloth onto the Window

Cleaning/Garment Steaming Tool and attach the

Window Cleaning/Garment Steaming Tool to

the Extension Hose as described in the “How To

Assemble the Optional Accessories” section in

this manual.

3) Select one of the following Steam Regulator

positions: 1 – Low or 2 – Medium

Do not use 3 – High and 4 - Hot Spray steam settings when using the

Garment Steamer.

You can change the Steam Regulator position and the steam output while operating

the H2O MOP X5™.

4) Follow Step 3 described in the “How To Assemble the Optional Accessories“

section in this manual.

5) Hold the Hand-Held Steamer in one hand and grasp the handle grip on the

Extension Hose with the other hand as illustrated above.

6) Slowly pass over surface to be cleaned. The absorbent Lint Cloth picks up the

dirt/hair loosened by the steam. Do not use on animals.

Pulling on the Extension Hose with excessive force will damage it, resulting in a

steam leak.

CAUTION