U.S. Patent No. 7,152,267 U.S. Patent No. 7,340,795 U.S. Patent No. 7,591,039 Add. Pat. Pending Distributed by Thane Direct Canada Inc. Mississauga, ON L4W 5M6, Canada www.thane.ca Thane Direct UK Ltd. WC2A 3LH www.thanedirect.co.uk Danoz Direct Pty Ltd Alexandria, Sydney NSW 2015, Australia www.danozdirect.com.au Fairfield, NJ 07004 Made In China © 2013 Ontel Products Corporation. All Rights Reserved.
NOTES: Congratulations and thank you for purchasing the Cordless , the quick & agile floor and carpet sweeper that lets you clean dirt and messes faster and easier than ordinary cordless sweepers. combines the cleaning The Secret: power of Quad-Brush® Technology – powerful rotating cleaning brushes pick up dirt and messes from all four sides of the sweeper head – with a 360° swivel feature to easily maneuver around furniture and other objects.
BASIC TROUBLESHOOTING: SAFETY PRECAUTIONS: 1. Swivel Sweeper® MAX is sluggish or won’t start: Make sure the battery is fully charged and securely inserted into the “Battery Compartment,” and that the pole section with the “Battery Compartment” is securely connected to the “Pole Base.” Check the “Rotating Cleaning Brushes” to make sure they are not entangled with hair, debris, etc.
IMPORTANT MAINTENANCE & CARE: 1 Step 6) Lift the “Air Filter” up & out by its “Removal Notch” (SEE FIG. 9). Rinse the “Air Filter” off, let dry and replace back into sweeper. 2 COMPONENTS Periodically wipe down your Swivel Sweeper with a dry or damp lint-free cloth. Do not use water, liquid cleansers or abrasive materials to clean Swivel Sweeper. 1. Rotating Rubberized Hang Loop 2. Handle 3. Heavy Duty Aluminum Pole 4. Rechargeable 7.2V Battery 5. Battery Compartment 6. On/Off Switch 7.
IMPORTANT MAINTENANCE & CARE: TO ASSEMBLE SWIVEL SWEEPER: As with any rotating brush cleaning device, FIG. 5 Swivel Sweeper’s four cleaning brushes will accumulate fine debris such as hair, thread and other particles. To maintain optimal sweeper performance, clean the sweeper’s rotating brushes of hair and debris and its “Air Filter” of dust and dirt as necessary following the directions below. A. Upper Pole B. Middle Pole C. Lower Pole D. Sweeper Head Step 1) Screw “Pole A” onto “Pole B” until secure.
IMPORTANT: For initial battery charge, let battery charge for at least 8 full hours. When recharging, charge time will vary dependent upon the amount of power that is left in the battery after its last use. Recommended recharging time for the battery after completely depleting it is 6-8 hours. Battery may be left in charger for extended periods of time but do NOT exceed 12 consecutive hours. Doing so may lead to shortened overall battery life.
