Instructions / Assembly

Insert the 4 leg tubes (rubber feet on bottom)

into the corners of a shelf.

Slide on next shelf to rest on the bottom

Insert extension tubes with joiners

Keep holes facing inwards.

Place top shelf onto plastic collars on extension tubes.



3 SHELF UNIT WS1003

ASSEMBLY DIAGRAM

Delta Cycle Corporation

125 Washinton Street

Foxborough, MA 02035 USA

SEE OVER

Note: Shelves can be mounted either way, as tray or at shelf

Note: Holes face inwards

“CLICK”

IMPORTANT: READ ENTIRE INSTRUCTION BEFORE ASSEMBLY

PARTS LIST

SHELF X 3

LEG TUBE X 4

EXTENSION TUBE X 4

TOP TUBE X 2

JOINER X 2

COLLAR X 4

PAGE 1
IMPORTANT: READ ENTIRE INSTRUCTION BEFORE ASSEMBLY PARTS LIST SHELF X 3 TOP TUBE X 2 LEG TUBE X 4 EXTENSION TUBE X 4 COLLAR X 4 JOINER X 2 Insert the 4 leg tubes (rubber feet on bottom) into the corners of a shelf. 1 Slide on next shelf to rest on the bottom 2 Place top shelf onto plastic collars on extension tubes. 4 Note: Shelves can be mounted either way, as tray or flat shelf Note: Holes face inwards Insert extension tubes with joiners Keep holes facing inwards.
PAGE 2
IMPORTANT: READ ENTIRE INSTRUCTION BEFORE ASSEMBLY Connect the two top tubes to the 4 extension tubes. Determine the desired height of the middle shelf and then slide shelf above the selected holes. Attach the four plastic collars at the desired height. 5 6 “CLICK” TOP Tab inside fits into tube hole Press the corners of middle shelf onto the 4 plastic collars. Seat all corners of each shelf onto its plastic collar to keep unit rigid. 7 INCLUDED: 2 spare Joiners allow for stacking extra racks.