User manual

1 [POWER]
The indicator light indicates that the device is switched on and operational.
2 [SIG]
The indicator light indicates that an input signal is present.
3 [CLIP]
Indicates overload (clipping). In this case, the level of the input signal is too high.
4 [BASS]
Control for boosting / attenuating the low frequencies
5 [VOLUME]
Control for adjusting the master volume (built-in subwoofer and connected external loudspeakers)
6 Phasing switch. Shifts the phase of the subwoofer signal by 180 °, if necessary. This avoids unwanted cancellation
eects in combination with other speakers.
7 [INPUT]
Signal inputs, designed as RCA sockets
Connections and operating elements
Achat 108 Sub A
19