User Manual Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 22.07.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – high-voltage. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. WARNING! Consequences of faulty mounting Faulty mounting may lead to lethal injuries or property damage.
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. NOTICE! Fire hazard due to exceedance of the maximum current The device can power other devices of identical construction. The current consumption of all other devices connected in series must not exceed the values indicated in the technical specifications. Otherwise you risk injuries and irreparable damages to the device.
Safety instructions NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.
Features 3 Features Achat 110 MA MKII Special features of the device: n n n n n n n n n n n n n n n Active 2-way full-range speaker box with built-in crossover 10 inch Ferrit woofer and 1 inch compression driver (woofer with 3 inch voice coil) Output power: 140 W RMS, 550 W Peak 2 × XLR / 1/4" jack combo socket (mic / line input) 1 × XLR line output (mix) Switchable presets (bass boost / flat / 120 Hz HPF) 2-band EQ Lockable in and output socket (Power Twist) Black textured paint 36 mm pole mount flang
Features Achat 112 MA MKII Special features of the device: n n n n n n n n n n n n n n n n 14 Active 2-way full-range speaker box with built-in crossover 12 inch Ferrit woofer and 1.
Features Achat 115 MA MKII Special features of the device: n n n n n n n n n n n n n n n n Active 2-way full-range speaker box with built-in crossover 15 inch woofer and 3 inch Ferrit mid / high speaker Output power: 350 W RMS, 1400 W Peak 2 × XLR / 1/4" jack combo mic / line input 1 × XLR line output (mix) Switchable presets (bass boost / flat / 120 Hz HPF) 2-band EQ Lockable in and output socket (Power Twist) Black textured paint 36 mm pole mount flange socket Aeroquip rail on the top side Attachment e
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.
Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area. Always use high grade cable to connect your equipment. Otherwise you won't reach max‐ imum sound quality.
Installation 4.2 Hanging the speaker box To hang the speaker box on special mounting devices (aka ‘flying’), the top of the housing of Achat 112 and Achat 115 MA MKII offer built-in Aeroquip or fly tracks. In these tracks safety eyelets (double studs) can be screwed or latched. With the Achat 110 MA MKII, M10 flying points are available for suspension. Check the secure connection of the box with the respec‐ tive suspension, before you use it in ‘flying mode’. 4.
Connections and operating elements 5 Connections and operating elements Achat 110 MA MKII 1 [STANDBY | CONDITION] Slide switch to enable or disable the power saving mode. If the speaker box is in power save mode and receives no signal for 60 minutes, it switches to standby mode. As soon as the unit receives a signal, it switches auto‐ matically back to normal mode.
Connections and operating elements 5 [MIX OUT] Line output for the mixed input signal from both channels. 6 [POWER ON/OFF] Use this mains switch to turn the device on or off. 7 [INPUT] Power Twist connector for powering the device. 8 [OUTPUT] Power Twist connector for powering another device. 9 [CH1 IN | CH2 IN] Signal input, designed as XLR / ¼" jack combo socket. 10 [LINE - MIC] Switch for toggling the sensitivity of the respective input between microphone and line level.
Connections and operating elements 12 [POWER] This LED lights up when the device is turned on. 13 [SIG/PEAK] This LED flickers or lights up green when a signal is present in at least one of the two channels. If the colour changes to red, this indicates that the permissible input level has been exceeded. Then reduce the volume in the relevant channel.
Connections and operating elements Achat 112 & 115 MA MKII 1 [PEAK] This LED indicates that the permissible input level has been exceeded. Then reduce the volume in the relevant channel. 2 [BASS BOOST | FLAT | 120Hz HPF] Preset switch [BASS BOOST]: Increasing the low frequencies. [FLAT]: Even frequency response. [120Hz HPF]: Attenuation of frequencies below 120 Hz (high pass filter). 3 [TREBLE] Controller to increase or decrease the treble by up to 15 db. OUTPUT 100-240V~50/60Hz max.
Connections and operating elements 7 [INPUT] Power Twist connector for powering the device. 8 [OUTPUT] Power Twist connector for powering another device. 9 [CH1 IN | CH2 IN] Signal input, designed as XLR / ¼" jack combo socket. 10 [LINE - MIC] Switch for toggling the sensitivity of the respective input between microphone and line level. 11 [CH1 VOL | CH2 VOL] Volume control for the respective channel. 12 [POWER] This LED lights up when the device is turned on.
Technical specifications 6 Technical specifications Achat 110 MA MKII Speaker Input connections Input sensitivity Input impedance Output connections Output power 1× 10" ferrite woofer, 1" compression driver Mic/Line 2 × XLR / 1/4" jack combo socket Power supply 1 × lockable input socket (Power Twist) Line 1 V (RMS) ± 10 % Mic 20 mV ± 10 % Line >20 kΩ Mic >1 kΩ Line 1 × XLR chassis plug Power supply of further devices Lockable output socket (Power Twist) Woofer 200 W @ 8 Ω Tweeter
Technical specifications Signal-to-noise ratio LF ≥88 dB (630 Hz, typical), HF ≥75 dB (6,3 kHz, typical) Sound pressure level (SPL), max. 120 dB Dispersion angle (H × V) 90° × 60° Power consumption 13.5 W ± 3 W (static) Operating supply voltage 100 - 240 V Fuse 3.5 mm × 10 mm, 5 A, 250 V, slow-blow Dimensions (W × H × D) 300 mm × 450 mm × 290 mm Weight 12.
Technical specifications Frequency response Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker 27
Technical specifications Achat 112 MA MKII Speaker Input connections Input sensitivity Input impedance Output connections Output power 1× 12" ferrite woofer, 1,75" compression driver Mic/Line 2 × XLR / 1/4" jack combo socket Power supply 1 × lockable input socket (Power Twist) Line 1 V (RMS) ± 10 % Mic 20 mV ± 10 % Line >20 kΩ Mic >1 kΩ Line 1 × XLR chassis plug Power supply of further devices Lockable output socket (Power Twist) Woofer 250 W @ 8 Ω Tweeter 28 W @ 8 Ω Output current
Technical specifications Dispersion angle (H × V) 60° × 40° (rotatable horn) Power consumption 16.5 W ± 3 W (static) Operating supply voltage 100 - 240 V Fuse 3.5 mm × 10 mm, 5 A, 250 V, slow-blow Dimensions (W × H × D) 360 mm × 600 mm × 365 mm Weight 20.
Technical specifications Frequency response 30 Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker
Technical specifications Achat 115 MA MKII Speaker Input connections Input sensitivity Input impedance Output connections Output power 1× 15" ferrite woofer, 3" compression driver Mic/Line 2 × XLR / 1/4" jack combo socket Power supply 1 × lockable input socket (Power Twist) Line 1 V (RMS) ± 10 % Mic 20 mV ± 10 % Line >20 kΩ Mic >1 kΩ Line 1 × XLR chassis plug Power supply of further devices Lockable output socket (Power Twist) Woofer 450 W @ 8 Ω Tweeter 50 W @ 8 Ω Output current 12
Technical specifications Dispersion angle (H × V) 60° × 40° Power consumption 16.5 W ± 3 W (static) Operating supply voltage 100 - 240 V Fuse 3.5 mm × 10 mm, 5 A, 250 V, slow-blow Dimensions (W × H × D) 436 mm × 766 mm × 438 mm Weight 38.
Technical specifications Frequency response Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker 33
Technical specifications Further information Achat 110 MA MKII (item no. 498103) Achat 112 MA MKII (item no. 498102) Achat 115 MA MKII (item no. 498105) Design Standard Standard Standard Monitor inclination yes yes yes Simultaneous inputs 2 2 2 Mic Preamp 2 2 2 Tone control / ch.
Technical specifications Achat 110 MA MKII (item no. 498103) Achat 112 MA MKII (item no. 498102) Achat 115 MA MKII (item no.
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker 37
Notes 38 Achat 110 MA MKII Achat 112 MA MKII Achat 115 MA MKII Active Speaker
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
