User manual

1 [ON/OFF]
Use this switch (power switch) to turn the unit on and o.
2 IEC chassis plug for power supply with fuse holder
3 [OUTPUT]
Signal output to connect another mixer, designed as XLR chassis plug
4 [HIGH CUT]
Control for adjusting the low-pass lter. This sets the upper cut-o frequency for the signal going to the built-in
amplier.
5 [LIMIT]
The LED lights up when the amplier's input level is too high. In this case, reduce the level of the input level.
6 [INV]
If necessary, this switch shifts the phase of the subwoofer signal by 180 °. This avoids unwanted cancellation eects in
combination with other speakers.
7 [ACTIVE]
The LED indicates that the device is switched on.
Operating elements
active speaker
20