Achat 208 HL / 208 HR passive speaker user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 22.09.
Table of contents Table of contents 1 General notes............................................................................................................................................... 4 2 Safety instructions..................................................................................................................................... 7 3 Features..............................................................................................................................................
General notes 1 General notes This user manual contains important information on safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device, include the manual for the next owner. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice.
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
General notes Warning signs Type of danger Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions WARNING! Consequences of faulty mounting Faulty mounting may lead to lethal injuries or property damage. Please ensure that the norms and regulations valid in your country are always observed when mounting and operating your product. In Germany: DGUV rule 17 „Veranstaltungs- und Produktions‐ stätten für szenische Darstellung“ (event and production sites for stage presentations). Only expertly trained staff may mount speakers.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Features 3 Features Special features of the device: n n n n n n n n n 2 × horn-loaded 8" mid-frequency transducers and 1 × 1.4" high-frequency driver Left horn 208 HL (item no. 283310) or right horn 208 HR (item no.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation WARNING! Hearing damage These devices can produce volume levels that may cause temporary or perma‐ nent hearing impairment in a short period of time. Set up the devices so that no persons can stay in their immediate vicinity. The devices must not be used as stage monitors. CAUTION! Risk of injury due to heavy weight Due to the heavy weight of the device, at least two persons are required for trans‐ port and installation.
Installation NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area. Always use high grade cable to connect your equipment. Otherwise you won't reach max‐ imum sound quality.
Installation 4.2 Hanging the speaker box To hang the speaker box on special mounting devices (aka ‘flying’) both sides of the box offer built-in Aeroquip or fly tracks. In these tracks safety eyelets (double studs) can be screwed or latched. Check the secure connection of the safety eyelets with the box carefully, before you use it in ‘flying mode’.
Installation 4.3 Connections ö achat 208 ...
Installation 4.4 Setup options The Achat 208 HL (left-hand version) and the Achat 208 HR (right-hand version) are always operated in pairs. The side where the horn is located is marked with a grooved line and with "AIM". When viewed from the front, the grooved line shows the vertical orientation of the horn (8° downwards). This allows you to see where the main radiation axis hits the ground and you can determine the range of the box via the height in which it is operated.
Installation Single setup at both sides of the stage ö ö # # 1 Grooved line marks the side where the horn is located 2 Adapter plate passive speaker 18
Installation Single setup at both sides and in the centre of the stage # # 2 Adapter plate When you spread the two centre loudspeakers by approximately 10 cm, you will get a more even acoustic diffusion (about 100° horizontally). When the box walls of the the two centre loudspeakers are located directly to one another, maximum coupling with a high concentration of the medium frequencies is achieved.
Installation Double block at both sides of the stage $ $ # # 2 Adapter plate 3 Link Bars for coupling two Achat 208 passive speaker 20
Installation Quad block at both sides of the stage The highest range is achieved with this setup.
Technical specifications 5 Technical specifications Speaker 2 × 8" mid-frequency transducers, 1.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Further information Monitor inclination No Colour Black Stand adapter Suitable stand adapter optionally available (item no. 120118) Protective cover Suitable protective cover optionally available (item no.
Technical specifications 435 mm 507 mm 37,7 m m 37,7 mm 435 mm 24 25 mm 225 mm 25 mm 170,5 mm 425 mm passive speaker m 250 m 5 mm m 2 50 m 659 mm m 25 m 225 mm 27,8°
Plug and connection assignment 6 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.