TP 118/800 passive subwoofer user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 19.05.
Table of contents Table of contents 1 General notes............................................................................................................................................... 4 2 Safety instructions..................................................................................................................................... 6 3 Features..............................................................................................................................................
General notes 1 General notes This user manual contains important information on safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to other users, be sure that they also receive this manual. Our products are subject to a process of continuous development. We therefore reserve the right to make changes without notice.
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended to be used in a sound reinforcement system. Use the device only as described in this user manual. Any other use or use under other operating conditions is consid‐ ered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use suffi‐ cient ear protectors. NOTICE! Operating conditions This device has been designed for indoor use only.
Features 3 Features n Connections: – 2 lockable NL4 sockets (1+/1– to woofer; 2+/ 2– interconnected) – 2 lockable NL4 sockets for system wiring (2+/ 2– to woofer; 1+/1– interconnected) n 2 × pole mount flanges, (M20), on topside n Casters optionally available n Black textured coating passive subwoofer 8
Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Establish all connections as long as the unit is switched off. Use the shortest possible highquality cables for all connections.
Installation NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.
Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area. Always use high grade cable to connect your equipment. Otherwise you won't reach max‐ imum sound quality.
Installation 4.2 Connections for wiring method ‘Bass to 1’ In order to use the connections for the wiring ‘Bass to 1’ rotate the connection panel cover in a way that the notches are in horizontal position.
Installation With this connecting method you can connect the woofer directly using a two-wire cable (wires 1+/1–). If using four-wire cables you can use those kind of top speakers that receive their signals through wires 2+/ 2– and interconnect wires 1+/1–. The woofer is connected to wires 1+/1– and interconnects wires 2+/ 2–. The order in which the speakers are connected doesn't matter, but the minimum load impedance of the amplifier must never be deceeded.
Installation 4.3 Connections for wiring method ‘Bass to 2’ In order to use the connections for the wiring ‘Bass to 2’ rotate the connection panel cover in a way that the notches are in vertical position.
Installation These connections allow for a simple wiring using four-wire cables, as the top speakers receive their signal through wires 1+/ 1– and interconnect wires 2+/ 2–. The woofer is connected to wires 2+/ 2– and interconnects wires 1+/ 1–. The order in which the speakers are connected doesn't matter, but the minimum load impedance of the amplifier must never be deceeded.
Technical specifications 5 Technical specifications Speakers 1 × 18" woofer Power handling 600 W (RMS), 2400 W (peak) Impedance 8Ω Sound pressure level 96 dB (1 W/1 m) 129 dB (max.
Protecting the environment 6 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes passive subwoofer 18
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.