TA12 full-range-speaker user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 25.10.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is designed for sound reinforcement. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug.
Safety instructions CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use suffi‐ cient ear protectors. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Safety instructions NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Features 3 Features Special features of the device: n n n n Speakers: 1 × 12-inch woofer, 1 × 1.4-inch tweeter Transmission range: 60 Hz – 16 kHz 35 mm flange on the bottom side for stand Optional infrared remote control (item no.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation CAUTION! Risk of injury due to heavy weight Due to the heavy weight of the device, at least two persons are required for trans‐ port and installation. NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field.
Installation 4.1 Tips on handling speakers We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐ ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound will be evenly spread with maximum range throughout the audience area. Always use high grade cable to connect your equipment. Otherwise you won't reach max‐ imum sound quality.
Connections and operating elements 5 Connections and operating elements 1 [VOLUME] Volume control for the input. Turn this control clockwise to increase the volume. decrease the volume by rotating counter-clockwise. First please adjust the volume to minimum before switching the unit on or making connections. Then adjust the appropriate volume. 2 [CLIP] The LED is illuminated when distortion occur at input level. 3 [MIC] Indication for a fitted microphone signal.
Connections and operating elements 5 [LINE/MIC] Switches input sensivity for microphone or LINE signals. As soon as the signals get microphone level, deeply push the control with a pen. For safety reasons, it only snaps in then. Do not push the control when the signals got LINE level. 6 [115 V / 230 V] Power supply switch Make sure this selector is set correctly for the actual supply voltage at the operating location. Use this switch only when the device is switched off.
Connections and operating elements 10 [OUTPUT] If you use multiple TA12 speaker boxes, you can supply the input of the next box with the signal of this output. 11 [INPUT] Connect to supply mains power. 12 IEC plug Make sure that the mains control (6) ist in the right position, BEFORE connection power supply.
Technical specifications 6 Technical specifications Speaker 1 × 12" woofer 1 × 1.4" tweeter Input connections Power supply IEC chassis plug C14 Signal input 1 × XLR chassis socket Input impedance balanced: 20 kΩ, unbalanced: 10 kΩ Output connections Signal output Output power 300 W (bass) & 100 W (treble) Frequency range 60 Hz … 16 kHz, –3 dB Beam angle 80° × 50° Distortion Line –0.02 %, Mic –0.04 % Load impedance Treble –8 Ω, Bass –8 Ω Sound pressure level (SPL), max.
Technical specifications Power consumption 800 W Supply voltage 115/230 V Fuse Supply voltage 230 V: 5 mm × 20 mm, 5 A, 250 V, slow-blow 50/60 Hz Supply voltage 115 V: 5 mm × 20 mm, 8 A, 250 V, slow-blow Dimensions (W × H × D) 377 mm × 395 mm × 610 mm Weight 30 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing Further information Multifunctional housing No Tripod flange Yes Truss-capable No TA12 23
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference.
Plug and connection assignment XLR plug (unbalanced) 1 Ground, shielding 2 Signal 3 Bridged to pin 1 full-range-speaker 26
Cleaning and care 8 Cleaning and care Housing Use only pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes TA12 29
Notes full-range-speaker 30
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
