User documentation The Confetti Maker FXⓇ TCMFX CO2 Jet Article Article Code Version Date : TCMFX Co2 Jet : TCM355 : 1.
User documentation The Confetti Maker FXⓇ Foreword Thank you for purchasing the TCMFX CO2 Jet. The Confetti Maker is manufacturer of biodegradable, colorfast and fireproof confetti products and special effects. The products we manufacture are used for various events, such as concerts, opening ceremonies, sporting events and theater show productions. With our products your party is guaranteed to be a great success. “We create experiences” This manual describes the TCMFX CO2 Jet.
User documentation The Confetti Maker FXⓇ General Safety WARNING! Read the manual carefully before using the TCMFX CO2-Jet. The Confetti Maker ® is not liable for injury, damage and/or excessive wear resulting from improper maintenance, improper use or modifications to the device. If you have any questions, issues or problems that do not get discussed in this guide, please tell your supervisor or call/e-mail the technical support from The Confetti Maker®.
User documentation The Confetti Maker FXⓇ Specifications Input Output Weight Size Base Plate Voltage Power : Powercon / CO2 : Powercon / CO2 : 2Kg : 80 x 50 x 130mm (L x W x H) : 110 x 125 mm (L x W) : 230V AC 50/60Hz : 30W Ideal environmental values Temperature : 0 – 45 ◦c Humidity : max. 75% Keep away from: - Dust - Corrosive gasses - High concentrations of organic gasses. Using the CO2 Jet The CO2 Jet is designed to be activated by a control panel at a distance.
User documentation The Confetti Maker FXⓇ CO2 The CO2 Jet can be connected with different types of gas bottles. With the 22,5kg bottle you can shoot up to 60seconds. With the 37,5kg bottle you can shoot up to 90seconds. Accessories The CO2 Jet is provided with Co2 through a hose that is connected to a gas cylinder. The CO2 hoses are for sale and rent in various lengths. - 5m - 10m - 15m CO2 Hose The CO2 Hose supplies the CO2 Jet with CO2. Connect male plug to the CO2 gas bottle.
User documentation The Confetti Maker FXⓇ Loop Through Cable The function of the loop through cable is supplying multiple devices with a single power socket. Looping through the device should only be done without power. The first CO2 Jet is connected to a power socket with the power socket to Powercon cable. The second CO2 Jet is powered with the blue Powercon connector on the loop through cable. The grey side of the loop through cable connects to the grey connector on the first CO2 Jet.
User documentation The Confetti Maker FXⓇ TCM FX-Control The TCM FX-Control is designed to control multiple TCM products. Connect the power socket to Powercon cable to the blue connector on the side of the FX Control. Connect the CO2 Jet to the FX-Control with the loop through cable. Connect the blue side of the cable to the CO2 Jet and the grey side of the cable to the back side of the FX Control. When firing the CO2 Jet first switch the key switch to unlock the panel.
User documentation The Confetti Maker FXⓇ Installation and use of the CO2 Jet Step 1 Connect the outlet tube to the “CO2 Out” side and turn the nut clockwise. Tighten securely with a wrench. Step 2 Place the CO2 hose to the “CO2 In” side.
User documentation The Confetti Maker FXⓇ Step 3 Connect the other end of the hose to the gas cylinder. Step 4 Place the blue Powercon cable in the first CO2 Jet. Only connect the cable if the cable is not powered. Plug the Powercon into the connector on the CO2 jet and make a small turn to the right until you hear a click sound. The cable is now properly connected.
User documentation The Confetti Maker FXⓇ Warranty The CO2 Jet has a 3 year warranty which will be void if the CO2 Jet is handled differently than described in this manual. When the CO2 Jet has been opened by anyone other than the Confetti Maker. The Confetti maker is not responsible for any paint or hardware damaged as a result of rough handling. CAUTION! Always contact your supplier in case of malfunctions. Never try to repair the CO2 Jet yourself.
