Specification Sheet

THEGALLEY.COM
Ideal Hot & Cold Tap
ASME 112.18.1
CSA B125.1
CALGreen
cUPC
In Progress
NPC
ADA
Ideal Hot Water Tank
UL Certied
Codes/Standards
Ideal Hot & Cold Tap
Specifications
Ø 1 3/8”
Max. 2 1/4”
Install.
Ideal Hot & Cold Tap
Solid 316L machined stainless steel construction
Available in Polished, Matte, PVD Gun Metal Gray™,
PVD Satin Black, PVD Brushed Gold, PVD Polished Rose Gold
Indoor & outdoor
Limited Lifetime Warranty
Made in Italy
Ideal Hot Water Tank™
304 stainless steel tank 0.6 USG (2.4 litres)
Five Year Warranty
Construction
Connector push-fit fitting
3/8” x 3/8”
Double elbow
push-fit Tee
3/8”
H
1”
Hot Tank
Adapter Adapter
Filter
C
Push-fit Tee 3/8”
IHT D PSS IHT D MSS IHT D GSS
IHT D BSS
IHT D YSS IHT D RSS
Polished
Stainless Steel
Matte
Stainless Steel
PVD Gun Metal Gray™
Stainless Steel
PVD Satin Black
Stainless Steel
PVD Brushed Gold
Stainless Steel
Limited Edition
PVD Rose Gold
Stainless Steel
Limited Edition
Ideal Hot & Cold Tap
Solid 316L Machined Stainless Steel Construction
Forward rotating COMFORTFEEL™ lever handles
Hot side lever is spring loaded for automatic shutoff 1/4 turn
Ceramic disk cartridges
Spout rotates 360°
Laminar Ideal Flow®
Thermally insulated spout
Provides ltered (not included), hot water, 208°F max
temperature
Provides ltered (not included), cold water (not chilled)
Optional base ring included
8 7/8" ll height from deck to spout outlet
Total height 13 1/4"
.50 GPM maximum ow rate for hot water
1.30 GPM maximum ow rate for cold (not chilled) water
Maximum counter thickness 2 1/4"
Minimum install hole diameter 1 3/8”
Compatible with reverse osmosis ltration systems
Limited Lifetime Mechanical and Finish Warranty
For use with full ow ltration unit (not included)
For use with Ideal Hot Water Tank™ (included)
Ideal Hot Water Tank
Digital control touch panel
Adjustable temperature settings = 3º increments
Seven preset temperatures = 167º-208ºF
Digital temperature control within 1-2º
On/off button with vacation mode feature
1500 watt/120-volt ceramic encased rapid-recovery element
60 cups per hour capacity
Standby reheat feature with low energy consumption 1W
Standby reheat at 6º temperature-drop
Built-in dry Burn and overheat sensors
Built-in 60 psi RV with patented Bafe Fill System
Encased element prevents limescale build-up
Double venturi reduces faucet “dripping/spitting”
Compatible with reverse osmosis ltration systems
Space-saving 7 1/2” W x 7 1/2” D x 10 3/4” H
Cabinet-side or oor-mount install options
Parts Included: Silicone Washers, Adapters
10 3/4”
4”
7 1/2”
Ideal Hot Water Tank
(Included)
10 3/4”
4”
7 1/2”
Certification Pending —
Expected Spring 2020