Specifications Sheet

Made in Italy

Speciﬁcations

Stainless Steel Pull-down Kitchen Faucet

Product Features

Codes / Standards Applicable

Finishes

Model IWT D

• Single-lever control ceramic disk cartridge

• Forward rotating COMFORTFEEL™ lever handle

• Solid AISI 316L Machined Stainless Steel Construction

• Indoor and outdoor

• 11” CENTERSTATION™ spout projection

• 11” pot ﬁll height from deck to spout outlet

• Spout rotates 360°

• Hand spray extends up to 27” from spout

• Magnetic docking system holds hand spray in place

• Ergonomic slide switch to select laminar or spray ﬂow

• Automatic return to laminar ﬂow

• Concealed easy-clean spray face

• Quiet, smooth gliding hose

• Counterweight

• Quick installation system

• Dual check valves

• 24” Stainless Steel Flexible Hoses 3/8” Compression

• Minimum Install Hole diameter 1 3/8”

• Maximum counter thickness 2”

• Maximum ﬂow rate 1.8gpm (6.8L/min)

• Total height 21 1/4”

• Optional base ring included

• Matte Stainless Steel IWT D MSS

• Polished Stainless Steel IWT D PSS

• PVD Black Satin Stainless Steel IWT D BSS

• PVD Gun Metal Gray Stainless Steel IWT D GSS

• ASME 112.18.1-2011/CSA B125.1-2012

• NSF 61 & NSF 372

• CALGreen

• AB1953

• ICC/ANSI A117.1

• ADA

Speciﬁc model meets or exceeds the following:

THEGALLEY

™

TAP

PAGE 1
Specifications Stainless Steel Pull-down Kitchen Faucet Model IWT D Product Features • Single-lever control ceramic disk cartridge • Forward rotating COMFORTFEEL™ lever handle • Solid AISI 316L Machined Stainless Steel Construction • Indoor and outdoor • 11” CENTERSTATION™ spout projection • 11” pot fill height from deck to spout outlet • Spout rotates 360° • Hand spray extends up to 27” from spout • Magnetic docking system holds hand spray in place • Ergonomic slide switch to select laminar or spray flo
PAGE 2
Specifications Stainless Steel Pull-down Kitchen Faucet Model IWT D Dimensions DIMENSIONS MAY VARY AND ARE SUBJECT TO CHANGE. NO RESPONSIBILITY IS ASSUMED FOR USE OF SUPERCEDED OR VOIDED DATA.