User Manual

ManualsBrandsThe Gerson Company ManualsDecorative AccessoriesThe Gerson Company"N LED Lighted Metal Letter with Rustic Brown Finish and Timer Function

LELSGN_005

DO NOT expose batteries to fire or water. DO NOT attempt to recharge, use different

sizes of batteries, or install batteries backwards. Never touch damaged or leaking

batteries - this could result in burn injuries or cause serious internal injuries if

swallowed. Obtain medical attention immediately if this occurs. Misuse can cause

battery to overheat, rupture, leak, or explode, resulting in personal injury and/or

property damage.

BATTERY WARNING:

• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries

(Nickel Metal Hydride).

• Do not mix old and new batteries.

• Non-rechargeable batteries are not to be recharged.

• Rechargeable batteries are to be removed from the item before being charged

(if removable).

• Rechargeable batteries are only to be charged under adult supervision (if removable).

• Exhausted batteries should be removed immediately and must be recycled or disposed

of properly according to state or local government ordinances and regulations.

• The supply terminals are not to be short-circuited.

• Only batteries of the same or equivalent type as recommended are to be used.

• Batteries are to be inserted with the correct polarity.

• Do not dispose batteries in a fire - batteries may leak or explode.

KEEP THIS INSTRUCTION SHEET FOR REFERENCE AS IT CONTAINS

IMPORTANT INFORMATION.

REMOVE BATTERIES IF EXPIRED OR IF PRODUCT IS TO

BE LEFT UNUSED FOR AN EXTENDED PERIOD OF TIME

INSTALL BATTERIES:

1. Remove battery compartment lid.

2. Clean the battery contacts and also those of the device prior to

battery installation.

3. Install 3 - AA batteries as shown on battery diagram in

battery compartment.

4. Return battery compartment lid to original position.

INSTRUCTIONS

CARE and USE:

1 Keep out and away from water.

2. Turn off when not in use to save battery life.

3. Remove used batteries promptly.

FOR INITIAL USE:

1. Press the ON / OFF / TIMER switch to operate the lights.

( 1

= ON

O = OFF 11 = TIMER)

You have 2 operation options:

Option 1-Timer Option Press the switch to TIMER at the time you

want the lights to come on each day. The lights will glow for 5 hours

then automatically go off, then the next day they will come on and

go off at the exact same time you set them for.

It is 5 hours on, 19 hours off.

Option 2-On/Off Option Press the switch to ON to turn the

lights on manually.