Manualshelf

Instructions / Assembly

ManualsBrandsThe Handler System ManualsKitchenLawn and Garden 5-Piece Tool Set with Garage Storage System
12
OPERATING
INSTRUCTIONS
STEP 1: Disassemble the garden rake
holder and lay out components.
STEP 2: Place metal garden rake into track.
*Please note that the rake does not need to
snap fit into the track.
STEP 3: Using a Phillips screw driver,
assemble the screw washer and lock nut
as pictured. *Please note that there will be
a slight gap between the top and bottom
holder.
Push Broom:
Remove screw from
the attachment
neck. Insert the neck
into the mating
attachment (head).
Line the hole in the tip of the neck to the
hole in the mating attachment. Using a
Phillips screw driver, secure the neck to
the broom. Tighten wing nuts on the shop
broom.
For instructional video visit:
www.thehandlersystem.com
For instructional video visit
www.thehandlersystem.com
ASSEMBLY INSTRUCTIONSWALL MOUNT ASSEMBLY
STEP 1: Remove wall mounts and screw
pack from packaging and locate stud on
wall.
STEP 2: Position wall mounts on stud as
pictured. Drill screws into stud. Be sure
to allow enough space between mounts
to insure that the head attachments will
not interfere with each other.
STEP 3: Insert attachments into
mounts.
For instructional video visit:
www.thehandlersystem.com
Scan QR code with your
smartphone!
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2 STEP 3

Summary of content (2 pages)