Installation & Assembly

STORAGE TIPS
1. Unplug the power strip from the wall outlet.
2. Unplug each section from the extension cord.
Do Not Separate Any Plug From It’s Stack
3. Gently lift off the top and middle sections, and remove the bottom section from the tree stand.
4. Replace the tree in its box, being careful not to damage the wire or break any bulbs.
5. Store the box in a cool, dry place where the temperature does not exceed 104
o
F (40
o
C).
USER SERVICING INSTRUCTIONS
This product employs a replaceable fuse. The following instructions should be followed for successful
replacement for the fuse.
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
2. Open fuse cover(s). Use a small blade screwdriver to slide open fuse
access cover on top of attachment plug towards blades.
3. Remove fuse(s) carefully. Turn fuse holder over to remove fuse(s).
4. Risk of fire. Replace fuse(s) only with 3 Amp, 120 Volt fuse (provided with product).
5. Close fuse cover(s). Slide closed the fuse access cover on top of attachment plug.
RISK OF FIRE: Do not replace attachment plug. The plug contains a safety device (fuse) that should not
be removed. Discard product if the attachment plug is damaged. This product employs series-connected
lamps. CAUTION: To reduce the risk of overheating, replace burned-out lamps promptly.
REPLACEMENT LAMPS AND FUSES
• Use only the bulb or fuse included
• Use 2.5 volt bulb for 50 or 100 light string
• Use 3.5 volt bulbs for 35 light string
• 125v, 5 amp fuse for extension cord