Installation & Assembly

Mosaic Tile Installation Guide

Grout Selection

Sanded or non-sanded grout should be used, depending on the product you are installing. Non-sanded grout is

recommended for grout lines 1/8” and smaller. It’s also best for mosaics with gloss finishes, as the texture of

sanded grout can scratch them.

Applying Grout

The setting material must be fully dry before attempting to grout. Consult the instructions for your setting material

to find the recommended drying time. Apply grout in small sections using a rubber float. Pull the grout across the

surface, pushing it fully into the grout lines and keeping excess from building up on the tile surface. Keep the grout

level, without any pits or low spots.

Grout Cleanup

Make sure the grout lines are well dried and consult the instructions for your setting material once more.

Start by using a dry, lint-free cloth and remove excess grout from the surface of the tile. Lightly dampen a sponge

with warm water and continue to clean grout off the tile. Once it appears to be clean, wipe it down again with a

fresh, lightly damp sponge to remove any grout film. After about 15 minutes, buff the tile with a soft cloth.

Finished grout should be smooth, uniform in color, and have no visible holes, pits, or uneven height issues.