FLUSH MOUNT HARDWARE KIT DIY INSTRUCTIONS 888-458-5911 MurphyDoor.
36”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
4”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
32”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
30”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
28”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
26”x82” Murphy Door Material List Quantity Material 1 4’ x 8’ x 3/4” Sheet (use good material for bookcase) 1 4’ x 8’ x 1/2” Sheet (use good material for back) Edge Banding as desired 20’ 3/4” x 4” Trim Materials 1 3/4” x 8” x Door Width 16.
Short Side 888-458-5911 Bottom Bottom JAMB Casing Top Long Side Jamb Top Adjustable Shelf Top Casing Side Casing Side Jamb Side Jamb Side Long Side BOOKCASE Short Side Middle Adjustable Shelf Bookcase Side Long Side Bookcase Bottom Top Bottom Jamb Hinge (Threshold) Middle Bookcase Back Top Door Hinge Jamb Bottom Bookcase Side Bookcase Middle Top Jamb Hinge Adjustable Shelf Short Side Bookcase Top Hinge Kit & Materials Countersunk Screw Holes 2 Notches Bottom Door Hinge FA
1 Assemble Face Frame Short Side Long Side Top Middle Bottom 2 Top Middle Botto m NOTE: Bar clamps are optional and not required to assemble the face frame. Assemble Bookcase Top NOTE: The top and bottom bookshelf pieces are double thick and the middle piece is just a standard single thickness.
3 Place Back Gently push on bookcase frame to square before fastening the back with screws. Make sure that the back is flush all the way across the top and bottom. VIEW OF BACK OF DOOR Line up with middle (fixed) shelf Top Long Side Short Side 4 om Bott Fastening Face Frame Top NOTE: Although not required, you may use some small finish nails in addition to the glue to help secure the face frame. 888-458-5911 Bo tto m Lon g Sid e Sho rt Sid e MurphyDoor.
5 Hinge Templates Jamb Bottom (Threshold) Front Front Jamb Bottom Front Corner Front (Inside) Corner Bottom of Upper Jamb 1. Place hinge templace on front corner of jamb bottom (threshold) piece 2. Drill Holes for preferred swing configuration 3. Flip hinge template and place on the front corner of the inside of upper jamb piece. 4. Drill holes for swing configuration that matches jamb bottom. NOTICE: Due to variations in printer settings, your printed template may not be scaled properly.
7 Install Hinges LEFT HINGE RIGHT HINGE OUT-SWING OUT-SWING Placing Pin in Upper Hinge 1) Insert pin through first hinge plate 2) Rotate 180° 3) Insert pin through second hinge plate 5) Pull pin down into notch to secure it in place. Top of Door Top of Door Front Front Front Front Jamb Bottom Jamb Bottom (Threshold) 888-458-5911 4) Rotate 90° (Threshold) MurphyDoor.
7 Install Hinges LEFT HINGE RIGHT HINGE IN-SWING IN-SWING Top of Door Top of Door Front Front Jamb Bottom Jamb Bottom Front Front (Threshold) 888-458-5911 (Threshold) MurphyDoor.
DOOR BOTTOM LEFT HINGE DOOR FRONT / FACE FRAME DOOR SIDE OUT SWING VIEW OF DOOR BOTTOM IN SWING 4” 3 1/4” DOOR BACK 888-458-5911 MurphyDoor.
DOOR BOTTOM RIGHT HINGE DOOR FRONT / FACE FRAME DOOR SIDE OUT SWING VIEW OF DOOR BOTTOM IN SWING 4” 3 1/4” DOOR BACK 888-458-5911 MurphyDoor.
IN FR N O T RN CO ER IN SWING E AC PL NOTE: Some holes will extend over the edge when placing on the Upper Jamb. LEFT HAND UPPER JAMB & LOWER THRESHOLD HINGE TEMPLATE NOTICE: Due to variations in individual printer settings we cannot guarantee that the printed template will be scaled properly. Please use the included measurements to verify proper placement. 4” OUT SWING Please see Step 5 for instructions on how to use this templtes. MurphyDoor.
4” E AC PL IN FR O T N ER RN CO IN SWING NOTICE: Due to variations in individual printer settings we cannot guarantee that the printed template will be scaled properly. Please use the included measurements to verify proper placement. UPPER JAMB & LOWER THRESHOLD HINGE TEMPLATE RIGHT HAND NOTE: Some holes will extend over the edge when placing on the Upper Jamb. OUT SWING Please see Step 5 for instructions on how to use this templtes. MurphyDoor.
Ogden Headquarters 2541 Rulon White Blvd Ogden, UT 84404 888-458-5911 Kentucky Distribution Center & Showroom 2320 Fortune Dr. #180 Lexington, KY 40509 MurphyDoor.
