Instructions / Assembly

Installation Guide:
HIDDEN ISLAND
S U P P O R T B R A C K E T
Step #1:
Start 3"-6" inches from the edge of the back side of the cabinet. Next,
notch out a 2.5" x 0.5" pocket on the backside of the cabinet, for the
bracket to rest into. (This will be on the side of the cabinet where the
overhang of the countertop.)
The Hidden Island Support Bracket is designed to attach to the inside
of the front wall of the cabinet (where the doors of the cabinet are)
& will extend through the cabinet to support the countertop overhang.
Step #2:
This "pocket" will allow the Hidden Island Support Bracket to sit flush with
the top of the cabinet.
NOTE: It is important that the bracket be flush with the cabinet in order for the
countertop to sit level & to protect the countertop.
Step #3:
Make your next notch for the next
bracket 16"-20" from the first notch.
Then space each of the brackets 16"-
20" apart for countertop protection.
Step #4:
Attach the flange of the bracket to the
inside of the front of the cabinet (where
the doors are) with appropriate wood
screws. The bracket will not interfere.
Step #5:
The bracket will rest inside the notch
you made supporting the countertop
overhang. The bracket should be flush
with the top of the cabinet in order to
protect your countertop & allow your
countertop to sit level.
Step #6:
Place the countertop on top of the
cabinet & brackets, then simply caulk
around the brackets with clear silicone.
NOTE: We have provided screws
HOWEVER make sure the length of the
provided screws are appropriate for your
project. If not appropriate DO NOT use the
screws provided. Each project is different
so protect your project by measuring before
you add the screws.
THE ORIGINAL
GRANITE BRACKET®
originalgranitebracket.com
888-584-1112
SAFETY INSTRUCTIONS
- Use the correct tools.
- Wear safety goggles &
proper safety equipment.
- Follow fixture, power tools
& paint manufactures
instructions & user
manuals.
- Use common sense
& follow good
construction practices.
- Consult a professional
when installing brackets for
load bearing application.
- Be sure the bracket has a
substructure that is able to
support the bracket & any
other additional weight that
may be added to it.
- When in doubt, consult a
professional installer.
WATCH OUR INSTALLATION VIDEO
https://originalgranitebracket.com
/pages/installation-videos