Instructions / Assembly

ManualsBrandsTHE ORIGINAL GRANITE BRACKET ManualsShelving13 in. Aluminum L Bracket Countertop Support Bracket

L BRACKET

C O U N T E R T O P S U P P O R T B R A C K E T

THE ORIGINAL

GRANITE BRACKET®

originalgranitebracket.com

888-584-1112

SAFETY INSTRUCTIONS

- Use the correct tools.

- Wear safety goggles &

proper safety equipment.

- Follow fixture, power tools

& paint manufactures

instructions & user

manuals.

- Use common sense

& follow good

construction practices.

- Consult a professional

when installing brackets for

load bearing application.

- Be sure the bracket has a

substructure that is able to

support the bracket & any

other additional weight that

may be added to it.

- When in doubt, consult a

professional installer.

The L Bracket is designed to attach to

onto a knee/pony wall OR into the back of a cabinet, reinforced with 2"x6".

NOTE: These are the ONLY applications to be used for our L Bracket Countertop Support Bracket.

WATCH OUR INSTALLATION VIDEO

https://originalgranitebracket.com

/pages/installation-videos

NOTE: We have provided screws HOWEVER make sure the length of the

provided screws are appropriate for your project. If not appropriate DO NOT use

the screws provided. Each project is different so protect your project by

measuring before you add the screws.

Installation Guide:

There are 2 options when installing the L Bracket:

onto a knee/pony wall OR

into the back of a cabinet, reinforced with a 2"x6"

ONTO A KNEE/PONY WALL

Locate your studs in the knee/pony

wall & space the brackets with the

studs on the knee/pony wall. It is

important that the vertical piece of

the L Bracket be mounted into each

stud in the knee/pony wall, in order

for the L Bracket to support &

protect the weight of the

countertop.

Step #1:

Step #2:

Once your studs are located, rout or chisel out a 2.5" wide by 0.5" deep

"pocket" at the top of the knee/pony wall, above each stud in the knee/pony

wall.

Step #3:

Insert the horizontal piece of the L Bracket into the "pocket" you created.

This will allow the horizontal piece to lie inside the "pocket", with the vertical

piece going down the back side of the knee/pony wall.

Step #4:

Use the appropriate wood screws to attach the L Bracket to the knee/pony

wall. Make sure the L Bracket sits flush into the "pocket" you routed out, in

order for the L Bracket to be flush with the knee/pony wall; insuring the

countertop is level & protected.

Step #5:

Once the brackets are secured in place, place your countertop on top of the

brackets & simply caulk around the brackets with clear silicone.

Summary of content (2 pages)

PAGE 1
L BRACKET C O U N T E R T O P S U P P O R T B R A C K E T The L Bracket is designed t o at t ach t o ont o a knee/pony wall OR int o t he back of a cabinet , reinforced wit h 2"x6". NOTE: These are the ONLY applications to be used for our L Bracket Countertop Support Bracket. Inst allat ion Guide: There are 2 opt ions when inst alling t he L Bracket : ont o a knee/pony wall OR int o t he back of a cabinet , reinforced wit h a 2"x6" St ep #1: THE ORIGINAL GRANITE BRACKET® originalgranitebracket.
PAGE 2
L BRACKET C O U N T E R T O P S U P P O R T B R A C K E T The L Bracket is designed t o at t ach t o ont o a knee/pony wall OR int o t he back of a cabinet , reinforced wit h 2"x6". NOTE: These are the ONLY applications to be used for our L Bracket Countertop Support Bracket.