Instructions / Assembly

SIDE WALL
C O U N T E R T O P S U P P O R T B R A C K E T
Step #1:
Start by cutting a 2.5" wide by 0.5"
deep "pocket" next to the side wall of
the cabinet.
Installation Guide:
The Side Wall Bracket is designed to attach to the side of the cabinet.
Step #2:
Step #3:
Once the "pocket" is made, simply
insert the Side Wall Countertop
Support Bracket & attach it using the
pre-drilled screw holes & appropriate
wood screws.
NOTE: We have provided screws
HOWEVER make sure the length of the
provided screws are appropriate for your
project. If not appropriate DO NOT use
the screws provided. Each project is
different so protect your project by
measuring before you add the screws.
Remember, the angle of the Side Wall
Countertop Support Bracket (left or
right) is determined by the front view.
NOTE: It is important that the bracket be
flush with the cabinet in order for the
countertop to sit level & to protect the
countertop.
Step #4:
Once the brackets are secured, place
your countertop on top of the brackets
& simply caulk around the brackets
with clear silicone.
We recommend spacing the brackets
16"-20" apart for maximum countertop
protection. If your countertops are
larger than the 20" spacing
recommendation, then using additional
countertop brackets in the middle will
help insure your countertop
investment.
THE ORIGINAL
GRANITE BRACKET®
originalgranitebracket.com
888-584-1112
SAFETY INSTRUCTIONS
- Use the correct tools.
- Wear safety goggles &
proper safety equipment.
- Follow fixture, power tools
& paint manufactures
instructions & user
manuals.
- Use common sense
& follow good
construction practices.
- Consult a professional
when installing brackets for
load bearing application.
- Be sure the bracket has a
substructure that is able to
support the bracket & any
other additional weight that
may be added to it.
- When in doubt, consult a
professional installer.
WATCH OUR INSTALLATION VIDEO
https://originalgranitebracket.com
/pages/installation-videos