Instructions / Assembly

SP-1000
The Solar PaQ
Solar Panel + Inverter + Universal Roof Mount Racking
UPC: 861150002609
Microinverter Instructions
Step 5 – Complete the connection map and connect the PV Modules
BDM‐250 connection Map is a diagrammatic representation of the physical location of each
BDM‐250 in your PV installation. The virtual array in NEP micro inverter gateway BDG‐256 is created
from the map you create.
Complete the connection map
Each BDM‐250 has a removable serial number located on the individual label. Enter the unique
address contained in part of the serial number into a BDG‐256, and correspond it to a number in the
connection map.
Connect the PV Modules
Completely install all BDM‐250 and all system inter‐wiring connections prior to installing the PV
modules.
1. Mount the PV modules above their corresponding BDM‐250. Each BDM‐250 comes with two
oppositely sexed DC connectors.
2. First connect the positive DC wire from the PV module to the positively marked DC connector
(male pin) of the BDM‐250. Then connect the negative DC wire from the PV module to the
negatively marked DC connector (female socket) of the BDM‐250. Repeat for all remaining PV
modules using one BDM‐250 for each module.