Instructions / Assembly

SP-1000

The Solar PaQ

Solar Panel + Inverter + Universal Roof Mount Racking

UPC: 861150002609

Microinverter Instructions

Status: producing power and communicating with BDG-256

The LED light is on by 0.5 second, and off by 0.5 second.

In case of fault, BDM‐250 has multiple protective functions and stops output power. The fault

message may be sent to a connected BDG‐256 gateway through power line communication. The

error message is displayed on the screen of BDG‐256 gateway by a 16‐bit error code.

7. TROUBLESHOOTING AND MAINTENANCE

WARNING: DO NOT ATTEMPT TO REPAIR THE BDM‐250; IT CONTAINS NO

USER‐SERVICEABLE PARTS. IF TROUBLESHOOTING METHODS FAIL, PLEASE RETURN THE BDM‐250 TO YOUR DISTRIBUTOR

FOR MAINTENANCE.

WARNING: NEVER DISCONNECT THE DC WIRE CONNECTORS UNDER LOAD. ENSURE THAT NO CURRENT IS FLOWING IN

THE DC WIRES PRIOR TO DISCONNECTING. AN OPAQUE COVERING MAY BE USED TO COVER THE MODULE PRIOR TO

DISCONNECTING

WARNING: ALWAYS DISCONNECT AC POWER BEFORE DISCONNECTING PV MODULE WIRES FROM BDM‐250. THE AC

CONNECTOR OF THE FIRST BDM‐250 IN A BRANCH CIRCUIT IS SUITABLE AS A DISCONNECTING MEANS ONCE THE AC

BRANCH CIRCUIT BREAKER IN THE LOAD CENTER HAS BEEN OPENED.

WARNING: BDM‐250 IS POWERED BY DC POWER FROM PV MODULES. MAKE SURE YOU DISCONNECT THE DC

CONNECTIONS AND RECONNECT DC POWER TO WATCH FOR THE TWO SECONDS LED ON AND TWO SECONDS LED OFF