Instructions / Assembly
Open the assembly unl bi-fold center brace (s) is
straight, ensure holes are lined up for securing
Place T23 Bolt into predrilled hole by bi-fold hinge en-
suring it is lined up with the predrilled hole below and
ghten.
Locate all squaring arms; connected to the underside
of cross brace, rotate them out to the point where
they naturally land on the top of rail.
Secure all of the squaring arms individually with pre-
installed T23, ghten fully by drilling with 1/2” socket
it into preposioned hole.
Locate Start Brackets and aach onto le end
*Remember Start brackets are only used at the begin-
ning of a row (on the farthest le side of the row )or to
complete a stand alone unit.
Using drill with 1/2” socket, secure by ghten bolt fully.
*Remember Start brackets are only used at the begin-
ning of a row (on the farthest le side of the row )or to
complete a stand alone unit.
5
6
7 8
9 10