Specifications

Table Of Contents

Renovators Supply, Inc. © www.rensup.com

These instructions and drawings disclose condential and other data of proprietary nature

owned by Renovator's Supply Inc.

and may not be used or disclosed to others without the

prior written consent of Renovator's Supply Inc.

1. Mark ceiling for medallion

position.

2. Mark position of 2 screws for

screwing medallion into place.

3. If you want the medallion to

encircle the chandelier pan or light

xture, lay the medallion on a at

surface & trace around the pan.

4. For installation around the

ceiling pan, cut hole with saber

saw,hand saw or serrated knife.

5. Paint medallion if desired.

6. Apply adhesive to underside of

medallion within 1/4 inch of the

edge.

7. Press medallion into

place.

8. Drive 2 screws through medallion

& into ceiling joists. (If you want to

leavescrews in place, countersink

them.) Let adhesive dry. Remove

screws if desired & caulk holes.

9. Run a bead of caulking around

the perimeter.

Ceiling

Medallion Instructions

PAGE 1
Ce ili Ce ili ng ng Renovators Supply, Inc. © www.rensup.com Medallion Instructions 1. Mark ceiling for medallion position. 2. Mark position of 2 screws for 3. If you want the medallion to screwing medallion into place. encircle the chandelier pan or light fixture, lay the medallion on a flat surface & trace around the pan. 7. Press medallion into place. g 6. Apply adhesive to underside of medallion within 1/4 inch of the edge. Ce ili n g Ce ili n Ce ili n g 4. For installation around the 5.
PAGE 2
Renovators Supply, Inc. © www.rensup.com Medallion Instructions How to select a medallion size: Follow these basic guidelines when trying to select the appropriate size medallion. A medallion should not overpower or underwhelm a room.