Instruction Manual SMB-635 Please read before using this unit.
PRECAUTIONS Please take good note of the following instructions: The unit must be connected to the power voltage which is the same as the local area. If not, there is a danger of "burning" the unit that causes a fire. Do not expose to the temperature higher than 35OC. Avoid installation near heaters or in areas subjected to direct sunlight. Ensure good air circulation. Protect the unit from dust, moisture and water. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Avoid strong magnetic fields, e.g.
SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT This equipment has been designed and manufactured to meet safety standards but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
LOCATION OF CONTROLS TOP VIEW 1. 2. 3. 4. 5. 6. 7. 8. 9. 1 3 2 4 5 6 FUNCTION Switch (CD/FM/AM/TAPE(OFF)) CD Door FM Rod Antenna Handle Dial Scale Indicator Tuning Control Volume Control CD Door OPEN lid Cassette Control Buttons 8 9 FRONT VIEW 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 11 CD SKIP BACK Button CD SKIP NEXT Button CD REPEAT Button POWER ON LED Indicator FM ST.
INTRODUCTION Please read these instructions carefully before using this product and retain them in a safe place for future reference. POWER SUPPLY This Product can be powered by either AC240V~50Hz Mains supply or by 6 R14 (C size) Alkaline batteries. AC OPERATION 1. Remove the AC cord which is packed inside the product. 2. Connect the cord to the AC input socket. 3. Connect the mains plug to a household AC socket. BATTERY OPERATION 1.
RECORDING Please note Chrome or Metal tapes are not recommended for use in this product. 1. Select desired function (CD or AM/FM) or TAPE for voice recording via internal condenser microphone. 2. Insert a blank tape with recording tabs intact into the cassette compartment. 3. Operate the desired function and select the material to be recorded. 4. Press the RECORD key, the PLAY key will automatically engage. 5.
PROGRAMMED PLAY Up to 20 tracks can be programmed for playback in any desired order. Ensure CD is in the stop mode. Press the PROG/MEM button, "PROG" and "00" will show in the display and flash. Using the SKIP buttons >>I or I<< select the first track to be memorized. Press the PROG/MEM button. This track is now placed in the memory. Repeat the above process up to a maximum of 20 tracks.
GUARANTEE WHAT’S COVERED H.E. Group Pty Ltd guarantees the BRATZ Boom Box CD Player for a full replacement for a period of 12 months from the date of purchase, which is only valid with the presentation of the original proof of purchase receipt. This guarantee covers materials and workmanship defects only. WHAT IS NOT COVERED This guarantee does not apply to defects arising from abuse, alteration or unreasonable use of the product. In addition, it does not cover general deterioration due to usage.
