Quadro 500 DSP power amplifier user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 20.05.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
General information Warning signs Type of danger Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device amplifies electric audio frequency signals to operate passive speakers. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker.
Features 3 Features 4-channel Class D power amplifier with built-in digital signal processor (DSP) Connections for four signal inputs, designed as XLR sockets Four lockable output sockets (Speaker Twist) Extensive adjustment options allow individual adaptation to different rooms and signal sources n USB port for connection to a PC n 19" rack-mountable (1 RU) n n n n power amplifier 12
Installation 4 Installation NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet. Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging.
Installation Rack mounting The unit has been designed for rack mounting in a standard 19-inch rack; it occupies one rack unit.
Connections and controls 5 Connections and controls Front panel ö # $ % & 1 [POWER] Main switch.
Connections and controls 3 [Functions Control] Rotary control to open menus, set values, and confirm selections 4 Vents 5 [Data] USB port to connect a computer. Download the driver “Prolific” from the product website under www.thomann.de to your computer, install it and open the software. Select the device under ‘DEVICES’ . After 5 seconds, the device is displayed in the right area. Click on ‘CONNECT’ . The status LED lights green.
Connections and controls Rear panel ' ( ) * 6 [INPUT CH A] … [INPUT CH D] Connections for four signal inputs, designed as XLR sockets 7 [OUTPUT CH A] … [OUTPUT CH D] Speaker outputs, designed as lockable panel sockets (Speaker Twist) Normal mode: CH A/B/C/D speaker 1+/1– ‘Bridge 12’ , ‘Bridge 34’ or ‘Bridge 12/34’ : CH A 1+ and CH A 2+ Quadro 500 DSP 17
Connections and controls 8 [Breaker] Resettable fuse 9 IEC chassis plug for the power supply.
Operating 6 Operating Level meter and setting When the main menu is closed, the display symbolically shows the level of the four input chan‐ nels. To adjust the volume of the inputs, proceed as follows: 1. Select with the control [Functions Control] one of the channels ‘CH1’ … ‘CH4’ and press the control. 2. Adjust the level in a range of –70 dB…+10 dB or mute the input ( ‘MUTE’ ). 3. Press the control.
Operating Main menu In the main menu, important settings are directly accessible. 1. Select with the control [Functions Control] the option ‘MENU’ and press the control. ð The main menu opens up. 2. Use the [Functions Control] control to select, to set values, and to navigate the menu. Pressing the control opens a menu item or confirms a setting. The table below shows on overview of the available menus. 3. In each submenu, select ‘EXIT’ to close the submenu. 4.
Operating Menu item Meaning ‘EQSETTING’ Opens the settings for the channel-wise switchable 8-band equalizer, the low-pass filter and the high-pass filter. For each of the eight bands, the frequency ( ‘FREQ’ ), the Q-shape ( ‘Q’ ), and the level boost / cut ( ‘Gain’ ) can be set. Using the Bypass option ( ‘BP’ ), the equalizer for the respective frequency can also be switched off completely.
Operating Menu item Meaning ‘SYSTEM’ Opens the menu for important basic settings ‘WORKMODE’ ‘parallel’ Normal mode (connection 1+/1–) ‘bridged’ 3 modes selectable: ‘Bridge 12’ , ‘Bridge 34’ or ‘Bridge 12/34’ (connection 1+/2+) ‘linked’ Channel A adopt the settings (Gains, EQs, Dynamics) of the channels B, C, and D. Routing stays freely selectable. ‘PIN’ PIN selection and key lock activation. ‘TEMP’ Setting the temperature used for the conversion of delay time into distance.
Technical specifications 7 Technical specifications Amplifier class D Inputs Signal input 4 × XLR socket Outputs Speaker output 4 × lockable input socket (Speaker Twist) Input impedance 20 kΩ (balanced) 10 kΩ (unbalanced) Output power 8Ω 4 × 250 W 4Ω 4 × 500 W Max. output power ‘bridged’ 1000 W Frequency response 20 Hz … 20 kHz (0 /– 1 dB) Signal-to-noise ratio 95 dB (A-weighted) Total harmonic distortion (THD) < 0.
Technical specifications Sensibility (limiter off) 0.9 V…1.1 V (0 /– 1 dBv) Gain 34 dB ±0.5 dB Crosstalk below rated power > 50 dB Latency 0.66 ms Power consumption 1100 W Supply voltage 230 V Dimensions (W × H × D) 483 mm × 460 mm × 44 mm Weight 8.
Technical specifications Block diagram Quadro 500 DSP 25
Technical specifications Further information Power 4Ω/channel 500 W Channels 4 19" installation height 1 RU 2 Ω stable No DSP / crossover Yes Convection cooling No power amplifier 26
Plug and connection assignment 8 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference.
Plug and connection assignment Speaker Twist connector # 1, + Signal 1 (positive) 1, – Signal 1 (negative) 2, + Signal 2 (positive) 2, – Signal 2 (negative) ö Quadro 500 DSP 29
Cleaning 9 Cleaning Fan grids The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Protecting the environment 10 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes power amplifier 32
Notes Quadro 500 DSP 33
Notes power amplifier 34
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.