User Manual TSA 1400, TSA 2200, TSA 4000 Power amplifier
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 06.10.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
TSA 1400, TSA 2200, TSA 4000 Power amplifier
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Cross-references References to other locations in this manual are identified by an arrow and the specified page number. In the electronic version of the manual, you can click the cross-reference to jump to the specified location. Example: See Ä ‘Cross-references’ on page 7. 1.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device amplifies electric audio frequency signals to operate passive speakers. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features Common features of all models described: integrated switching power supply XLR inputs lockable NL4 output sockets protective circuits – audio limiter – Thermal protection – short circuit protection n 19" rack-mountable (2 RU) n n n n Find device-specific features here, Ä Chapter 5 ‘Connections and controls’ on page 14 and Ä Chapter 6 ‘Technical specifications’ on page 22.
Installation and starting up 4 Installation and starting up NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suit‐ able underlay if necessary, i.e. felt pads or similar. Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging.
Connections and controls 5 Connections and controls Front panel TSA 1400, 2200 # $ 14 TSA 1400, TSA 2200, TSA 4000 Power amplifier ö
Connections and controls 1 [POWER] | mains switch to turn the device on and off 2 Indicator LEDs [CH-A], [CH-B] | These LEDs indicate the ready status of the device ([Power]), the input signal level ([Signal] / [–20] / [–15] / [–10] / [–5]), channel overdrive ([Clip]) and a fault condition ([Fault]). 3 [CH-A], [CH-B] | input gain controls for channels A and B The [Power] LED is permanently lit during operation. The [Signal] / [–20] / [–15] / [–10] / [–5] LEDs respond to the input signal.
Connections and controls Rear panel TSA 14002200 % 16 TSA 1400, TSA 2200, TSA 4000 Power amplifier & ' ( ) *
Connections and controls 4 IEC chassis plug for the power supply 5 [OUTPUT CH-A], [OUTPUT CH-B] | signal outputs, designed as lockable NL4 chassis socket to connect speakers 6, 9 [INPUT CH-A], [INPUT CH-B] | signal input channels, designed as XLR socket pair (input / output) to loop the audio signal to other devices 7 [Stereo | Bridge] push-button | switch for operating modes ‘Stereo’ (channels operate independently of each other) and ‘Bridge’ (two channels are interconnected to form one channel with doubl
Connections and controls Front panel TSA 4000 # $ 18 TSA 1400, TSA 2200, TSA 4000 Power amplifier ö
Connections and controls 1 [POWER] | mains switch to turn the device on and off 2 Indicator LEDs [CH-A], [CH-B] | These LEDs indicate the ready status of the device ([Power]), the input signal level ([Signal] / [–20] / [–15] / [–10] / [–5]), channel overdrive ([Clip]) and a fault condition ([Fault]). 3 [CH-A], [CH-B] | input gain controls for channels A and B The [Power] LED is permanently lit during operation. The [Signal] / [–20] / [–15] / [–10] / [–5] LEDs respond to the input signal.
Connections and controls Rear panel TSA 4000 % & 20 TSA 1400, TSA 2200, TSA 4000 Power amplifier ' ( )
Connections and controls 4 IEC chassis plug for the power supply 5 [OUTPUT A], [OUTPUT B] | signal outputs, designed as lockable NL4 chassis socket to connect speakers 6, 8 [INPUT A], [INPUT B] | signal input channels, designed as XLR socket pair (input / output) to loop the audio signal to other devices 7 [Stereo | Parallel | Bridge] | switch for operating modes ‘Stereo’ (channels operate independently of each other), ‘Paral‐ lel’ (two channels are interconnected) and ‘Bridge’ (two channels are interconne
Technical specifications 6 Technical specifications TSA 1400 Amplifier class H Input impedance 20 kW (balanced) 10 kW (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 2 × 450 W RMS 4 Ω, stereo 2 × 670 W RMS 2 Ω, stereo 2 × 800 W RMS 8 Ω, stereo 1 × 1380 W RMS 4 Ω, stereo 1 × 1600 W RMS 2 Ω, stereo – Max. voltage increase (RMS) (THD ≤1%, 1 kHz) 60V Slew rate (1 kHz) 35 V/ms IMD-SMPTE (60 Hz, 7 kHz) <0.
Technical specifications Crosstalk (at 1 kHz, 10 % nominal power) > 70 dB Frequency response (at 1 kHz) 20 Hz … 20 kHz (0 - 2 dB) Signal-to-noise ratio 105 dB (A-weighted) Total harmonic distortion (THD) <0.1 % Damping factor (100 Hz / 1 kHz, 8 Ω) >400 Sensitivity 1V Gain 38.3 dB Power consumption Typical current draw depending on the output power level (RMS value ARMS). All values based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine).
Technical specifications Weight 10.
Technical specifications TSA 2200 Amplifier class H Input impedance 20 kW (balanced) 10 kW (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 2 × 590 W RMS 4 Ω, stereo 2 × 910 W RMS 2 Ω, stereo 2 × 1200 W RMS 8 Ω, stereo 1 × 1800 W RMS 4 Ω, stereo 1 × 2400 W RMS 2 Ω, stereo – Max. voltage increase (RMS) (THD ≤1%, 1 kHz) 68.7V Slew rate (1 kHz) 41 V/ms IMD-SMPTE (60 Hz, 7 kHz) <0.1 % DIM 30 (3.15 kHz, 15 kHz) <0.
Technical specifications Signal-to-noise ratio 105 dB (A-weighted) Total harmonic distortion (THD) <0.1 % Damping factor (100 Hz / 1 kHz, 8 Ω) >400 Sensitivity 1V Gain 39.8 dB Power consumption Typical current draw depending on the output power level (RMS value ARMS). All values based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine). Load 1/8 nominal power 1/3 nominal power (2 ×) 8 Ω 260 W / 1.6 A 400 W / 2.6 A (2 ×) 4 Ω 680 W / 3.8 A 1180 W / 6.2 A (2 ×) 2 Ω 850 W / 4.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) TSA 1400, TSA 2200, TSA 4000 Power amplifier 27
Technical specifications TSA 4000 Amplifier class H Input impedance 20 kW (balanced) 10 kW (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 2 × 1000 W RMS 4 Ω, stereo 2 × 1500 W RMS 2 Ω, stereo – RMS 8 Ω, stereo 1 × 2865 W RMS 4 Ω, stereo – RMS 2 Ω, stereo – Max. voltage increase (RMS) (THD ≤1%, 1 kHz) 89V Slew rate (1 kHz) 50 V/ms IMD-SMPTE (60 Hz, 7 kHz) <0.35 % DIM 30 (3.15 kHz, 15 kHz) <0.
Technical specifications Signal-to-noise ratio 106 dB (A-weighted) Total harmonic distortion (THD) <0.1 % Damping factor (100 Hz / 1 kHz, 8 Ω) >450 Sensitivity 1V Gain 37 dB Power consumption Typical current draw depending on the output power level (RMS value ARMS). All values based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine). Load 1/8 nominal power 1/3 nominal power (2 ×) 8 Ω 475 W / 3.5 A 974 W / 6.5 A (2 ×) 4 Ω 708 W / 4.9 A 1640 W / 10.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Further information Channels 2 suitable for 19" racks 2 RU 2 Ω stability yes DSP / frequency no Convection cooling no Protective circuits (temperature, short circuit, limiter) yes 30 TSA 1400, TSA 2200, TSA 4000 Power amplifier
Technical specifications Block diagram Pre-amplifier CHA INPUT Sensitivity Amplifier OUT A /1&2 Bridge 2 1 3 1+ 1- 2+ 2- Volume Phase Reversal OFF ON A–B Sensitivity Pre-amplifier Amplifier OUT B ON CHB INPUT 2 1 OFF 3 1&2 BRDG 1+ 1- 2+ 2- Volume Sensitivity 0.775V/1.
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment XLR plug (balanced) 1 Ground, shielding 2 Signal (in phase, +) 3 Signal (out of phase, –) 4 Shielding on plug housing (option) 1 Ground, shielding 2 Signal 3 Bridged to pin 1 XLR plug (unbalanced) TSA 1400, TSA 2200, TSA 4000 Power amplifier 33
Plug and connection assignment Speaker Twist chassis connector # ö 34 TSA 1400, TSA 2200, TSA 4000 Power amplifier 1, + Signal 1 (in phase) 1, – Signal 1 (out of phase) 2, + Signal 2 (in phase) 2, – Signal 2 (out of phase)
Cleaning 8 Cleaning Fan grids The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes TSA 1400, TSA 2200, TSA 4000 Power amplifier 37
Notes 38 TSA 1400, TSA 2200, TSA 4000 Power amplifier
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.