TSA 4-700, TSA 4-300, TSA 4-1300 power amplifier user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 28.01.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Cross-references References to other locations in this manual are identified by an arrow and the specified page number. In the electronic version of the manual, you can click the cross-reference to jump to the specified location.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device amplifies electric audio frequency signals to operate passive speakers. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug.
Safety instructions CAUTION! Possible hearing damage The device can produce volume levels that may cause temporary or permanent hearing impairment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance or use suffi‐ cient ear protectors. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker.
Safety instructions NOTICE! Magnetic fields The device generates strong magnetic fields that can interfere with the function of poorly shielded devices. The strongest magnetic fields are directly above and below the power amplifier. Therefore, never place sensitive devices such as preamplifiers, radio transmission systems, or tape decks directly above or below the power amplifier.
Features 3 Features Common features of all models described: integrated switching power supply XLR inputs lockable NL4 output sockets protective circuits – audio limiter – Thermal protection – short circuit protection n 19" rack-mountable (2 RU) n n n n Find device-specific features here, Ä Chapter 5 ‘Connections and controls’ on page 15 and Ä Chapter 6 ‘Technical specifications’ on page 29.
Installation and starting up 4 Installation and starting up NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your parquet, linoleum, laminate or PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet. Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging.
Connections and controls 5 Connections and controls Front panel TSA 4-700 TSA 4-700, TSA 4-300, TSA 4-1300 15
Connections and controls 1 [POWER] Main switch to turn the device on and off. 2 LED displays for [CH-A] … [CH-D] These LEDs indicate the ready status of the device ([Power]), the input signal level ([Signal] / [–20] / [–15] / [–10] / [–5]), channel overdrive ([Clip]) and a fault condition ([Fault]). 3 [CH-A] … [CH-D] Input gain controls for channels A to D. The [Power] LED is permanently lit during operation. The [Signal] / [–20] / [–15] / [–10] / [–5] LEDs respond to the input signal.
Connections and controls Rear panel TSA 4-700 TSA 4-700, TSA 4-300, TSA 4-1300 17
Connections and controls 4 IEC chassis plug for the power supply. 5 [OUTPUT CH-A] … [OUTPUT CH-D] Signal outputs, designed as lockable NL4 chassis socket to connect speakers. 6, 9, 10, 11 [INPUT CH-A] … [INPUT CH-D] Signal input channels, designed as XLR socket pair (input / output) to loop the audio signal to other devices.
Connections and controls Front panel TSA 4-300, TSA 4-1300 TSA 4-700, TSA 4-300, TSA 4-1300 19
Connections and controls 1 [POWER] Main switch to turn the device on and off. 2 LED displays [CH-A] … [CH-D] These LEDs indicate the ready status of the device ([Power]), the input signal level ([Signal] / [–20] / [–15] / [–10] / [–5]), channel overdrive ([Clip]) and a fault condition ([Fault]). 3 [CH-A] … [CH-D] Input gain controls for channels A to D. The [Power] LED is permanently lit during operation. The [Signal] / [–20] / [–15] / [–10] / [–5] LEDs respond to the input signal.
Connections and controls Rear panel TSA 4-300 TSA 4-700, TSA 4-300, TSA 4-1300 21
Connections and controls 4 IEC chassis plug for the power supply. 5 [RESET] Push button; resets the built-in automatic fuse if it has been tripped. 6 [OUTPUT CH-A] … [OUTPUT CH-D] Signal outputs, designed as lockable NL4 chassis socket to connect speakers. 7 [INPUT A] … [INPUT D] XLR signal input sockets. 8 [SENSITIVITY] Switch to set the input sensitivity at which the power amplifier outputs its full rated power: 0.775 VRMS or 1.4 VRMS.
Connections and controls [A-B] Slide switch; determines how the input signals A and B are processed. In the [Off] position, the signals are amplified in ‘stereo’ mode and separately fed to outputs A and B. The volume for output A and output B can be controlled sepa‐ rately with the controls for channel A or B. Wiring of the NL4 output sockets: Plus terminal = 1+, minus terminal = 1–. In the [On] position, the signals are added and fed as a mono sum signal to the power amps.
Connections and controls [B-C] Slide switch; determines how the input signals B and C are processed. In the [Off] position, the signals are fed sepa‐ rately to the power amps. In the [On] position, the signals are added and fed as a mono sum signal to the power amps. [C-D] Slide switch; determines how the input signals C and D are processed. In the [Off] position, the signals are amplified in ‘stereo’ mode and separately fed to outputs A and B.
Connections and controls Rear panel TSA 4-1300 TSA 4-700, TSA 4-300, TSA 4-1300 25
Connections and controls 4 Lockable Power Twist input socket for power supply. 5 [RESET] Push button; resets the built-in automatic fuse if it has been tripped. 6 [OUTPUT CH-A] … [OUTPUT CH-D] Signal outputs, designed as lockable NL4 chassis socket to connect speakers. 7 [INPUT A] … [INPUT D] XLR signal input sockets. 8 [SENSITIVITY] Switch to set the input sensitivity at which the power amplifier outputs its full rated power: 0.775 VRMS or 1.4 VRMS.
Connections and controls [A-B] Slide switch; determines how the input signals A and B are processed. In the [Off] position, the signals are amplified in ‘stereo’ mode and separately fed to outputs A and B. The volume for output A and output B can be controlled sepa‐ rately with the controls for channel A or B. Wiring of the NL4 output sockets: Plus terminal = 1+, minus terminal = 1–. In the [On] position, the signals are added and fed as a mono sum signal to the power amps.
Connections and controls [B-C] Slide switch; determines how the input signals B and C are processed. In the [Off] position, the signals are fed sepa‐ rately to the power amps. In the [On] position, the signals are added and fed as a mono sum signal to the power amps. [C-D] Slide switch; determines how the input signals C and D are processed. In the [Off] position, the signals are amplified in ‘stereo’ mode and separately fed to outputs A and B.
Technical specifications 6 Technical specifications TSA 4-700 Amplifier class H Input impedance 20 kW (balanced) 10 kW (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) Max. voltage increase (RMS) (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 4 × 490 W RMS 4 Ω, stereo 4 × 810 W RMS 2 Ω, stereo 4 × 930 W RMS 8 Ω, stereo 2 × 1600 W RMS 4 Ω, stereo 2 × 1800 W RMS 2 Ω, stereo – 62.
Technical specifications Slew rate (1 kHz) 38 V/ms IMD-SMPTE (60 Hz, 7 kHz) < 0.1 % DIM 30 (3.15 kHz, 15 kHz) < 0.1 % Crosstalk (ref. 1 kHz, 10 % rated power) > 70 dB Frequency response (at 1 kHz) 20 Hz … 20 kHz (0 – 2 dB) Signal-to-noise ratio 105 dB (A-weighted) Total harmonic distortion (THD) < 0.1 % Damping factor (100 Hz / 1 kHz, 8 Ω) > 400 Sensitivity 1V Gain 38.4 dB Power consumption Typical current consumption depending on the output power level (ARMS).
Technical specifications (4 ×) 4 Ω 650 W / 4,2 A 1500 W / 9,4 A (4 ×) 2 Ω 950 W / 6,1 A 1800 W / 11,1 A (2 ×) 8 Ω, bridged 620 W / 4,1 A 2450 W / 14,4 A (2 ×) 4 Ω, bridged 870 W / 5,8 A 3300 W / 18,7 A Supply voltage AC 230 V Dimensions (W × H × D) 488 mm × 370 mm × 97 mm Weight 10.
Technical specifications TSA 4-300 Amplifier class H Input impedance 20 kW (balanced) 10 kW (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 4 × 350 W RMS 4 Ω, stereo 4 × 550 W RMS 8 Ω, stereo 2 × 1000 W RMS 4 Ω, stereo – IMD-SMPTE (60 Hz, 7 kHz) ≤ 0.
Technical specifications Attenuation factor (10 Hz / 400 Hz, 8 W) > 200 Sensitivity 0.775 V / 1.4 V, (switchable) Gain 35.3 dB Power consumption Typical current consumption depending on the output power level (ARMS). All values based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine).
Technical specifications TSA 4-1300 Amplifier class H Input impedance 20 kΩ (balanced) 10 kΩ (unbalanced) Nominal power output (THD ≤1%, 1 kHz) Max. power output, bridged mode (THD ≤1%, 1 kHz) RMS 8 Ω, stereo 4 × 1220 W RMS 4 Ω, stereo 4 × 1670 W RMS 8 Ω, stereo 2 × 4000 W RMS 4 Ω, stereo – IMD-SMPTE (60 Hz, 7 kHz) ≤ 0.
Technical specifications Attenuation factor (10 Hz / 400 Hz, 8 W) > 200 Sensitivity 0.775 V / 1.4 V, (switchable) Gain 37.8 dB Power consumption Typical current consumption depending on the output power level (ARMS). All values based on a 230 V mains voltage and a 1 kHz input signal at 0 dB (sine).
Technical specifications Further information TSA 4-700 TSA 4-300 TSA 4-1300 Item no. 218915 Item no. 325986 Item no.
Technical specifications Block diagram TSA 4-700, TSA 4-300, TSA 4-1300 37
Plug and connection assignment 7 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Plug and connection assignment Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference.
Plug and connection assignment XLR plug (unbalanced) 1 Ground, shielding 2 Signal 3 Bridged to pin 1 1, + Signal 1 (in phase) 1, – Signal 1 (out of phase) 2, + Signal 2 (in phase) 2, – Signal 2 (out of phase) Speaker Twist chassis connector power amplifier 40
Cleaning 8 Cleaning Fan grids The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Protecting the environment 9 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.