User manual

1. Press [SET].
ð
The main menu opens up.
2. Use the arrow buttons to select the submenu ‘Advanced’ .
Press [SET] to conrm the selection.
3. Use the arrow buttons to select the submenu ‘Tune’ .
Press [SET] to conrm the selection.
4. First use the arrow buttons to set the value before the decimal point, then press [SET]
and set the value after the decimal point.
Press [SET] to conrm the entry.
ð
The display shows that the receiver is being adjusted to the new frequency. After a
few seconds, the display shows the normal sate again.
5. Press the main switch to close the menu.
Entering the frequency directly
(channel U)
Operating
column PT
29