User manual

1. Press [SET].

The main menu opens up.

2. Use the arrow buttons to select the submenu ‘Freq. preset’ .

Press [SET] to conrm the selection.

The ‘CH xxx’ display appears.

3. Use the arrow buttons to select a channel between 1 and 90. The bottom line of the dis‐

play shows the corresponding frequency.

Select channel U to enter the frequency directly.

Press [SET] to conrm the selection.

The display shows that the receiver is being adjusted to the new frequency. After a

few seconds, the display shows the normal sate again.

4. Press the main switch to close the menu.

Select channel

Operating

UHF wireless system